Language Settings - Pioneer DVR-220 Operating Instructions Manual

The Initial Setup menu
12
If your AV receiver (or other connected component) is
compatible with high sampling rate audio (88.2 / 96 kHz),
set to 96kHz, otherwise set to 96kHz
the manual that came with the connected component if
you're unsure whether it is compatible with high
sampling rate audio.
MPEG Out
You only need to make this setting if you connected this
recorder to an AV amplifier (or other component) using the
digital output.
• Default setting: MPEG
Initial Setup
Basic
Tuner
Video Out
Audio In
Audio Out
Language
Recording
Playback
If your AV receiver (or other connected component) is
MPEG audio compatible, set to MPEG, otherwise set to
MPEG PCM. Check the manual that came with the
connected component if you're unsure whether it is
MPEG compatible.

Language settings

OSD Language
• Default setting: English
Initial Setup
Basic
Tuner
Video Out
Audio In
Audio Out
Language
Recording
Playback
This sets the language of the on-screen menus and
displays.
Audio Language
• Default setting: English
Initial Setup
Basic
Tuner
Video Out
Audio In
Audio Out
Language
Recording
Playback
80
En
48kHz. Check
PCM
Digital Out MPEG
Dolby Digital Out MPEG PCM
DTS Out
96kHz PCM Out
MPEG Out
OSD Language
English
Audio Language
français
Subtitle Language
Auto Language
DVD Menu Language
Subtitle Display
OSD Language English
Audio Language French
Subtitle Language Other
Auto Language
DVD Menu Language
Subtitle Display
This setting is your preferred audio language for DVD
discs. If the language you specify here is recorded on a
disc, the recorder automatically plays the disc in that
language (although this depends on the Auto Language
setting—see Auto Language below).
Choose Other if you want to specify a language other
than English or French (see Selecting 'Other' languages
on page 81).
Tip
• You can switch between the languages recorded on
a DVD disc any time during playback using the
AUDIO button. (This does not affect this setting.)
Subtitle Language
• Default setting: English
Initial Setup
Basic OSD Language
Tuner Audio Language
Video Out Subtitle Language
Audio In Auto Language
Audio Out DVD Menu Language
Language Subtitle Display
Recording
Playback
This setting is your preferred subtitle language for DVD
discs. If the language you specify here is recorded on a
disc, the recorder automatically plays the disc with those
subtitles (although this depends on the Auto Language
setting—see Auto Language below).
Choose Other if you want to specify a language other
than English or French (see Selecting 'Other' languages
on page 81).
Tip
• You can change or switch off the subtitles on a DVD
disc any time during playback using the SUBTITLE
button. (This does not affect this setting.)
Auto Language
• Default setting: On
Initial Setup
Basic OSD Language
Tuner Audio Language
Video Out Subtitle Language
Audio In Auto Language
Audio Out DVD Menu Language
Language Subtitle Display
Recording
Playback
English
French
Other
On
Off