On Screen Display; Front Panel Display; Input Line System; Power Save - Pioneer DVR-5100H Operating Instructions Manual

The Initial Setup menu
13
Set the date (day/month/year) and time, then
press ENTER to make all the settings.
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback
Use the
the value in the highlighted field.
Use the
from one field to another.

Input Line System

• Default setting: 625System
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback
For standard PAL or SECAM recording, leave the input
line system to 625System. When recording an NTSC or
PAL–60 signal through an external input, change to
525System.
Note
• When the current input is a built-in tuner channel
preset, changing the input line system will usually
also affect the input line system of the AV2/(INPUT
1/DECODER) input. However if the AV2/L1 In setting
is set to Decoder (see AV2/L1 In on page 100), then
the L2 input is affected instead.
• If when this setting is changed, the screen goes
blank (due to incompatibility with your TV), you can
switch back by pressing and holding
then pressing HDD/DVD while the recorder is
stopped.
• When you switch the Line Input System setting the
Copy List is erased. If you switch the setting using the
STOP REC and HDD/DVD buttons as described
above, there is no confirmation, so please use with
care.
• You can't mix recordings of different TV line systems
on the same disc.
• When you change this setting, the Input Colour
System setting also changes (see Input Colour
System on page 100).
96
En
Manual Clock Setting
Clock Setting Clock Setting
Input Line System
Date WED
01 01 2003

On Screen Display

Front Panel Display

Time
00 00

Power Save

Time Zone England
Remote Control Set
London
Setup Navigator
Summer Time On
(cursor up/down) buttons to change
(cursor left/right) buttons to move
Clock Setting
525System
Input Line System
625System
On Screen Display
Front Panel Display
Power Save
Remote Control Set
Setup Navigator
STOP REC
On Screen Display
• Default setting: On
Initial Setup
2/2
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback
On the default setting, the recorder shows on-screen
operation displays (Play, Stop and so on). Change to Off
to hide these displays.
Front Panel Display
• Default setting: On
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback
On the default setting, the time is shown in the front
panel display when the recorder is in standby. Switch to
Off to have the front panel display switch off completely
when in standby.
Note
• When set to Off, the display still lights dimly in
standby when setting a timer recording, or during
Auto Start Recording.
Power Save
• Default setting: Off
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback
When set to Off, signals arriving at the ANTENNA IN
terminal and at the AV2/(INPUT 1/DECODER) AV
connector are passed through to the ANTENNA OUT
terminal and to the AV1(RGB)-TV AV connector,
respectively, when the recorder is in standby.
You can cut the standby power consumption of the
recorder by turning off the through function for one or
both terminals:
Clock Setting On
Input Line System Off
On Screen Display
Front Panel Display
Power Save
Remote Control Set
Setup Navigator
Clock Setting
On
Input Line System
Off
On Screen Display
Front Panel Display
Power Save
Remote Control Set
Setup Navigator
Clock Setting Mode1
Input Line System Mode2
On Screen Display Off
Front Panel Display
Power Save
Remote Control Set
Setup Navigator