Door; Probe - GE Monogram ZET938 Owner's Manual

How to set
the oven Jot
roasting
when using
the probe
1
2
Insert the probe into the n/eat.
Pluo_ the probe into the outlet in the o_ei1.
Make sure it is pushed all the way in.
Close the oxen door.
3
4
Press tile PROBE pad.
Press the nunlber pads to set the desired
internal fi)od or nleat teinl)erature. The
nlaxinlunl internal teini)erature fl)r tile food
that you can set is 200°F.
5 Press the BAKE pad.
6 Press the nunlber pads to set the desired
o_,en teillperat life.
7 Press tile START pad.
77_,¢ displr 9' will flash !/tt_,¢ probe is inserted into
the 0uiM and you have not ,set a probe temperature
and Dressed the START Dad.
When the o_en starts to heat, the word "I,O"
will be in the displa).
AIter the internal teinl)erature of the
n/eat reaches 100°K the changino internal
tenlperature will be shown in tile display.
8 When tile internal teinl)erature of tile nleat
reaches tile nun/her you have set, tile probe
and tile ()veil turn off and tile ()veil control
signals. To stop tile signal, press tile
CLEAR/OFF pad. Use hot pads to ren/ove
tile probe fl'oin tile ti)od. Do not use tongs
to pull on it--they n/ight dan/age it.
To chanoe_ tile oven teinl)erature durino_ tile
Roast c_cle press the BAKE pad and then the
nunlber pads to set tile new ten/l)erature.
• If tile probe is renloved fl'oin tile fi)od 1)etk)I'e
the final teini)erature is reached, a tone will
sound and tile display will flash until tile
l)I'obe is I'elllOVed ti'Oill
tile
()veil.
• You can use tile tinier even thou,*h xou
cannot rise tin/ed oxen ol)erations.
@
®®@®@®®®®@
@
@@@@@(9@@@@
@
®
25