Clock; Control Lockout - GE Monogram ZET1P Owner's Manual

Power
If a flashing time of day is in the display,
you have experienced a power failure.
failure
Reset the clock.

Clock

The clock must be set for the automatic oven timing
functions to work properly.
The time of day clock cannot be changed
during Delay Start. (It can be changed during
a regular bake or broil operation.)
To set
1 Push the CLOCK button.
the clock
2 Turn the Mini-Knob to select the time of day
Control Allows you to lock out all controls so that
the Oven Mode knob, Temperature knob and
lockout
the control panel buttons cannot be activated
when set.
NOTE: On double oven models, this activates this
feature for both ovens.
To lock/unlock the controls:
1 Push and hold the COOK TIME and
2 To unlock, push and hold the COOK TIME
When this feature is on and the controls are
attempted to be set, the display will show "Loc."
NOTES:
• If locked while a cooking, cleaning or timed function
• The adjustment will be retained in memory after a
28
and push it to enter.
NOTE: While setting, the time will roll
around from AM to PM.
DELAY START buttons at the same time
for 3 seconds until the control beeps and
the display shows "Loc." After locking the
controls, the time of day will appear in the
display.
and DELAY START buttons at the same time.
("Loc" will appear in the display). Hold for
3 seconds until the control beeps and "Loc"
disappears from the display.
are in operation, they will be cancelled.
power failure.
Clock and Control Lockout Features
Wall Oven
Double oven display shown.
Push to
select
Double oven display shown.
Mini-Knob
Turn to select
Push to enter
Push and hold at
the same time to
lock/unlock