TP-Link JetStream TL-SG3424P User Manual page 196

MIB View:
Community Table
Select:
Community Name:
Access:
MIB View:
Operation:
Note:
The default MIB View of SNMP Community is viewDefault.
Configuration Procedure:
If SNMPv3 is employed, please take the following steps:
Step Operation
1 Enable SNMP function globally.
2 Create SNMP View.
3 Create SNMP Group.
4 Create SNMP User.
read-only: Management right of the Community is
restricted to read-only, and changes cannot be made to
the corresponding View.
read-write: Management right of the Community is
read-write and
corresponding View.
Select the MIB View for the community to access.
Select the desired entry to delete the corresponding
Community. It is multi-optional.
Displays the Community Name here.
Displays the right of the Community to access the View.
Displays the Views which the Community can access.
Click the Edit button to modify the MIB View and the Access
right of the Community, and then click the Modify button to
apply.
Description
Required. On the SNMP→SNMP Config→Global
Config page, enable SNMP function globally.
Required. On the SNMP→SNMP Config→SNMP
View page, create SNMP View of the management
agent. The default View Name is viewDefault and the
default OID is 1.
Required. On the SNMP→SNMP Config→SNMP
Group page, create SNMP Group for SNMPv3 and
specify SNMP Views with various access levels for
SNMP Group.
Required. On the SNMP→SNMP Config→SNMP
User page, create SNMP User in the Group and
configure the auth/privacy mode and auth/privacy
password for the User.
187
changes can be made to the