Hardware Installation - EnGenius EAP350 Manual

13

2.4 Hardware Installation

1) Ensure that the computer in use has an Ethernet Card (RJ-45 Ethernet Port). For more information, verify with our
computer user manual.
2) Connect one end of the Category 5 Ethernet cable into RJ-45 port of the EAP350 and the other end to the RJ-45
port on the computer that will use the EAP350. Ensure that the cable is securely connected to both the EAP350 and
the Computer.
3) Connect the Power Adaptor DC Inlet to the DC-IN port of the EAP350 and the Power Adaptor to the electrical out.
Once both connections are secure, verify the following:
a) Ensure that the Power light is on (it will be blue).
b) Ensure that the Wireless light is on (it will be blue).
c) Ensure that the LAN (Computer/EAP350 Connection) light is on (it will be blue).
d) Once all three lights are on, proceed to setting up the computer.
This diagram depicts the hardware configuration.