Slave Unit - Durabrand PDV-722 Instruction Manual

CONTROLS OVERVIEW

Slave unit

NOTE: The slave unit is only a second screen with speakers. All adjustments (except for
picture and volume) can only be done on the main unit.
Front view
1 2 3
1. TFT LCD SCREEN – Provides a high resolution picture.
2. SPEAKERS – Provide stereo sound.
3. BRIGHTNESS BUTTONS – Press to adjust the brightness of the slave unit.
4. COLOR BUTTONS – Press to adjust the color of the slave unit
5. VOLUME BUTTONS – Press to adjust the volume.
6. SAFETY CORD – This is a backup hanging cord should the mounting band open accidentally.
7. CAR HEADREST MOUNTING STRAP SLOTS – For attaching the car headrest mounting
strap.
8. POWER ON/OFF SWITCH – Slide to switch the slave unit ON or OFF.
9. DC IN JACK – For connecting to the supplied AC adaptor or car adaptor, so that the slave
unit has power and then can provide power to the main unit and the two units can work
together.
10. DC OUT JACK – For connecting to the main unit's DC IN jack using the supplied DC
power cord.
11. PHONES JACKS – Insert your headphones (not included) to enjoy the sound without
disturbing others. This slave unit allows two people to listen to the sound through their
headphones at the same time.
12. AUDIO IN JACKS – Connect to the main unit using the supplied audio cable for sound.
13. VIDEO IN JACK – Connects to the main unit using the supplied video cable for picture.
IB-PDV722-WM-E-012007.pmd
4 5 2
6
7
Left side view Right side view
7
8
9
10
6
IB-PDV722-WM-E-012007
2/12/2007, 1:19 AM
11
12
13