Durabrand PDV-722 Instruction Manual page 30

Dual screen portable dvd player
Table of Contents

Advertisement

TROUBLE SHOOTING
Symptom
The
picture
squeezed or stretched.
No sound from your TV or
speakers.
There is no function or less
function when you adjust the
color or the brightness of
the LCD screen.
The remote control unit
does not work.
No rapid advance or
rapid reverse play.
Cabinet vibrates or hums.
Th e pl ayer 's con tr ol s
don't work or the player
cannot work properly.
IB-PDV722-WM-E-012007.pmd
The LCD mode and TV type you are in may be wrong for this
seems
movie, try changing the LCD and TV type setting for standard
or widescreen. See pages 24 & 25.
1. Press AUDIO button several times. The disc may have been
set to DTS output or a blank audio channel on multiple
language, please select AC-3 output or reset to the main
language (refer to page 17).
2. Adjust the DVD player's volume.
3. Make sure the AUDIO output connection and setting are
correct. See details on pages 12,13 and 26.
4. Ensure that the equipment is connected properly.
5. Ensure that the input setting for the TV and stereo system
are correct.
6. Adjust the volume setting on your TV's remote.
7. Make sure the headphones are detached from the DVD player.
8. The movie is paused, press play.
9. The movie is in search or fast play or other speed related play.
Audio is heard only during normal play.
The disc you used is a poorly copied one, please replace it
with a fresh original disc.
1. Check that the remote's batteries are installed correctly.
2. The remote's batteries are weak or depleted, replace it
with new ones (refer to page 11).
3. Use the remote control at a distance of less than 20 feet
(6m) from the DVD player main unit.
4. Remove any obstacles between the remote control and
remote control sensor, also make sure the lens on the
remote control is not dirty.
5. Make sure you point the remote to the DVD player main
unit, not the slave unit or TV.
Some discs may have sections which prohibit rapid advance
(or rapid reverse), or even pause, especially on opening
screens or during FBI warnings, etc..
This is normal for high speed reading of DVD discs.
Set needs to be reset.
Reset the DVD player by sliding the main unit's POWER
switch to the OFF position and disconnecting the AC adaptor
for 1 minute. Replace the AC adaptor and slide the main
unit's POWER switch to ON position to resume normal use.
(The player may not be operating properly due to lightning,
static electricity, damaged or wrong discs, or some other
external factors).
30
Remedy
29
2/12/2007, 1:20 AM
IB-PDV722-WM-E-012007

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents