Ptz Control Window - Bosch MBV-BPRO-40 Operator's Manual

58 en | User interface
Main window >
Displays a site map, it cannot display video content and is not limited to a 4:3 ratio.
If a map cannot be displayed completely in the Map window, you can drag the map. A special
cursor is displayed.
11.17

PTZ Control window

Main window >
The PTZ Control window becomes active when a PTZ camera or a swiveling/tilting camera is
displayed in the selected Image pane.
Allows you to control a camera with the corresponding functions displayed in the selected
Image pane.
when a non-PTZ camera is selected.
camera in all directions.
angle (wide angle).
Prepositions:
Select an entry to move the PTZ control to the predefined position.
Click to save the current position of the PTZ camera to the selected preposition entry.
2012.07 | V1 | Operation Client
> Drag a map from the
> PTZ Control tab
Click to zoom in or out digitally. These controls are active even
Click an arrow or drag the joystick in the center to swivel the
Click to zoom in the picture angle (zoom angle) / zooming out the picture
Click to set the focus near / focus far.
Click to close the iris / open the iris.
Operator's Manual
Bosch Video Management System
to the tab
Bosch Sicherheitssysteme GmbH