Table of Contents
Advertisement
16
en | Displaying camera images
To display information:
4
5.16
Starting instant playback
Main window >
You can view the recordings of a camera in an Image pane in the Live Mode.
The current setting of the digital zoom and the image section are used for instant playback.
The start time (number of seconds in the past or rewind time) for instant playback is configured
in the Options dialog box (Extras menu, Options... command).
To start instant playback:
1.
2.
Note: More than one Image pane with instant playback is possible, even multiple instant
playbacks of the same camera.
5.17
Assigning a camera to a monitor
Main window >
You can assign IP devices to a decoder. This displays the video signal on the analog monitor
and plays the audio signal on the speakers if connected to the decoder. DiBos and Bosch
Allegiant cameras cannot be assigned this way.
To assign a camera image to a monitor:
1.
2.
5.18
Using audio mode
Main window
If available you can activate audio for a selected camera.
To hear the audio signal of multiple cameras simultaneously, activate multichannel audio
mode.
You switch the audio mode in the Options dialog box (Extras menu, Options... command).
To activate / de-activate audio:
1.
2.
5.19
Displaying metadata (for NVR recordings only)
Main window >
Main window
You can display metadata of the selected camera such as ATM / POS / Barcode if available.
2012.07 | V1 | Operation Client
Right-click an Image pane with a camera assigned and click Properties.
A dialog box with the camera properties is displayed.
Select the required Image pane.
Click
.
The recording is played.
To return to live image, click
>
Click the
tab and the
Drag a camera from the Logical Tree window to the desired monitor.
Select an Image pane.
Click
to de-activate or
.
tab
tab.
to activate audio.
Operator's Manual
Bosch Video Management System
Bosch Sicherheitssysteme GmbH
Advertisement
Table of Contents
