Table of Contents
Advertisement
Camera Browser
Interface
3.1.2
View Control ROI
When the Stream 2 encoder stream is set for Region of Interest
(ROI), a specific type of View Control panel is activated for
electronic pan, tilt and zoom control (E-PTZ).
Refer to Encoder Streams for more information on setting up
Stream 2. (If dual ROI is available, open the camera in a second
browser window to set up the ROI on Stream 2.)
Zoom
To zoom in on a region of the stream 2 image:
1.
2.
Select an area
To select a particular region of the image:
1.
2.
Set positions
To store the current view:
1.
2.
3.
To display a pre-set region of interest, click one of the buttons
numbered one to six.
Bosch Security Systems
Click and hold
zoom out.
Click
to see the full image.
Click and hold the arrows to move up and down, and from
side to side through the image.
Click and hold the center area to move in all directions.
Select a region of interest.
Click Set.
Click a number.
Operation via the browser | en
to zoom in; click and hold
2015.04 | v1.592 | AM18-Q0678
15
to
Advertisement
Table of Contents
