Table of Contents
Advertisement
30
en | Handling alarms
9
Handling alarms
This chapter provides information on how to handle alarms.
Some of the features described in this chapter can be deactivated for your user group.
Notice!
i
A map displayed in an Alarm Image pane is optimized for display and contains only the initial
view of the basic .dwf file.
9.1
Accepting an alarm
Main window >
or
Main window >
You can accept a single alarm or multiple alarms for clearing or starting a workflow.
To accept an alarm:
1.
2.
When an alarm is accepted, several things happen simultaneously:
–
–
–
–
To display an alarm camera on an analog monitor:
4
9.2
Adding comments to an alarm
Main window >
or
Main window >
You can only comment an alarm after you have accepted it.
2012.07 | V1 | Operation Client
>
>
Select the desired alarm entry and click
For returning to the Image window, click
The alarm is removed from Alarm Lists of all other users.
If not already displayed, an Alarm Image window replaces the Live Image window on the
monitor that has been enabled for alarms.
The alarm content (live video, instant playback video, or site maps) is shown in a row of
Alarm Image panes in the Alarm Image window.
If there is a workflow associated with the alarm, the workflow button
You can now clear the alarm or start a workflow. If the alarm has been configured to
"force workflow", then you must complete the workflow before you can clear the alarm.
Drag the camera image from its Alarm Image pane to an analog monitor group.
>
>
tab
tab
.
.
tab > Select the desired alarm >
tab > Select the desired alarm >
Operator's Manual
Bosch Video Management System
is enabled.
Bosch Sicherheitssysteme GmbH
Advertisement
Table of Contents
