Menu Commands; Window - Bosch MBV-BPRO-40 Operator's Manual

48 en | User interface
12
Alarm List window
13 Event type
14
Monitors window (only available
if at least one analog monitor group has
been configured)
PTZ Control window
15
Logical Tree window
Favorites Tree window
Bookmarks window
Map window
Detailed information:
–
–
–
–
–
–
–
–
–
11.4

Menu commands

System menu commands
2012.07 | V1 | Operation Client
Menu commands, 48
Logical Tree window
Favorites Tree window, 56
Map window, 57
PTZ Control window, 58
Monitors window, 59
Image window, 59
Image pane, 60
Alarm List window, 66
Playback Mode / Live Mode
Displays all alarms the system generates.
Allows you to accept or clear an alarm or to start a workflow,
for example, by sending an E-mail to a maintenance person.
The Alarm List is not being displayed, when the connection
to the Management Server is lost.
Indicates the type of event that triggered the alarm.
Displays the configured analog monitor groups.
Allows you to switch to the next or previous analog monitor
group if available.
Note:
The Monitors tab is not visible if your Operator Client is
connected to more than one Management Server.
Allows you to control a PTZ camera.
Displays the devices your user group has access to. Allows
you to select a device for assigning it to an Image pane.
Allows you to organize the devices of the Logical Tree as
required.
Allows to manage bookmarks.
Displays a site map. Allows you to drag the map to display a
particular section of the map.
If activated, a map is displayed automatically for each camera
displayed in an Image pane. In this case, the camera must be
configured on a map.
Switches to Playback or Live Mode depending on
the current state.
Operator's Manual
Bosch Video Management System
Bosch Sicherheitssysteme GmbH