Using A Keyboard Connected To A Decoder - Bosch MBV-BPRO-40 Operator's Manual

Bosch Video Management System
To use the Command Mode:
1.
2.
The following commands are available:
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
10.3

Using a keyboard connected to a decoder

A keyboard connected to decoder gives you access to the Management Server without
Operator Client software. Hence, you must log on. Only the analog mode is available.
Bosch Sicherheitssysteme GmbH
Switch to the Command Mode.
Press a softkey to execute the desired command.
: Load a sequence. In the Status Display, enter the sequence number.
: Sequence play, pause
/ : Sequence step forward / backward
: Maximize / restore selected Image pane
: Close selected Image pane
: Toggle between Live Mode and Playback Mode
: Toggle selected Image pane between Live Mode and instant playback
/ : Show more Image panes / less Image panes
/ : Start /stop alarm recording
: Audio on / off
NEXT: Switch to next page
/ / / : Trigger a user event (1-4), only available with single Management
Server
: Set the default Management Server, only available when you log on to Operator
Client as a user of an Enterprise User Group.
: Image pane bars on / off
: Full-screen on / off
Operator's Manual
Using a CCTV keyboard | en
UP
Level Up Camera2
Camera1
Map1
Folder1
Map2
Map3
DOWN DOWN
2012.07 | V1 | Operation Client
39