Download  Print this page

Selecting The Source By The Remote Control; Enjoying Surround Sound Effects - Panasonic SC-PT470 Operating Instructions Manual

Dvd home theater sound system.
Hide thumbs

Advertisement

Selecting the playback source (continued)
DVD
USB, iPod
SETUP

Selecting the source by the remote control

DVD
RADIO
EXT-IN
USB
iPod
Enjoying sound from all speakers and various
sound effects
SURROUND
SETUP,
−CH SELECT
≥ The following sound effects may not be available or may have no effect
with some sources, or when headphones are used (
≥ You may experience a reduction in sound quality when these sound effects
are used with some sources. If this occurs, turn the sound effects off.
12
USB
RADIO
RADIO, EXT-IN
DVD
iPod
EXT-IN
START
SETUP
DVD/CD (
9)
Each time you press the button:
FM (
10)
[Australia]and]N.Z.]
AM (
10)
AUX
:
For audio input through the AUX
§
terminal.
D-IN
:
For audio input through the
§
OPTICAL IN terminal. (
"(TV)" will appear beside "AUX" or
§
"D-IN", indicating the TV audio setting for
VIERA Link "HDAVI Control" (
USB (
23)
iPod (
22)
+,
VOL
VOL
SURROUND
SOUND
SOUND
OK
OK
SETUP
W.SRD
Australia and N.Z.
-CH SELECT
Others
MIC VOL
35).
Press [SELECTOR] on the main unit to select source from the main unit.
(
35)
[Note]
Confirm the audio connection to the AUX or OPTICAL IN terminal on the
main unit when you select the corresponding sources (
volume on the TV to its minimum, and then adjust the volume of the main
unit.
Making settings for digital audio input
Select to suit the type of audio from the OPTICAL IN terminal on the main
unit.
1 While in "D-IN" mode
Press [SETUP] to select "MAIN/SAP", "DRC" or "PCM FIX".
2 While the selected mode is displayed
Press [3, 4] to make the setting.
MAIN/SAP mode (Only works with Dolby Dual Mono):
MAIN, SAP
"SAP" = Secondary Audio Program
§
Dynamic Range Compression
DRC ON:
DRC OFF: The full dynamic range of the signal is reproduced.
PCM FIX mode
PCM ON:
PCM OFF: Select when receiving Dolby Digital and PCM signals.
right)
(When receiving true 5.1-channel surround sound, select "PCM OFF".)
[Note]
20).
≥ Audio that is input through the OPTICAL IN terminal is not output from
the HDMI terminal.
≥ Underlined items in the above paragraphs are factory settings.

Enjoying surround sound effects

SURROUND
While "MANUAL" is
displayed
W.SRD
W.SRD
"ÎPLII" lights in the main unit's display when there is effect.
§
Recommended modes to enjoy TV audio or stereo
sources from all speakers:
≥ PLII MOVIE
≥ PLII MUSIC
≥ S.SRND
, MAIN+SAP
(stereo audio)
§
§
Adjust for clarity even when the volume is low by
compressing the range of the lowest sound level and the
highest sound level. Convenient for late night viewing.
(Only works with Dolby Digital)
Select when receiving only PCM signals.
SURROUND OUTPUT indicator on the main unit
will light up when there is surround sound effect.
Each time you press the button:
STANDARD:
Sound is output as it was recorded/encoded.
Speaker output varies depending on the source.
MULTI-CH:
You can enjoy sound from the front speakers, as
well as the surround speakers even when playing
a 2-channel sound or non-surround sound.
MANUAL: (
below)
Select other surround modes.
Each time you press [2, 1]:
PLII MOVIE
§
Suitable for movie software, or softwares
recorded in Dolby Surround. (except [DivX])
PLII MUSIC
§
Adds 5.1-channel effects to stereo sources.
(except [DivX])
S.SRND
You can enjoy sound from all speakers with stereo
sources. (Surround output will be in mono.)
STEREO
Sound will only be output to the front
speakers and the subwoofer from any source.
7). Reduce the

Advertisement

Table of Contents

   Also See for Panasonic SC-PT470

   Related Manuals for Panasonic SC-PT470

This manual is also suitable for:

Sa-pt470Sb-hf470Sb-hc470Sb-hs470Sb-hw460

Comments to this Manuals

Symbols: 0
Latest comments: