Download  Print this page

Selecting The Source By The Remote Control; Enjoying Surround Sound Effects - Panasonic SC-PT170 Operating Instructions Manual

Dvd home theater sound system.
Hide thumbs

Advertisement

Selecting the playback source (continued)
DVD
USB
SETUP

Selecting the source by the remote control

DVD
RADIO
EXT-IN
USB
Press [SELECTOR] on this unit to select source from this
unit. (
39)
Enjoying sound from all speakers and various
sound effects
SURROUND
SETUP,
─CH SELECT
≥The following sound effects may not be available or
may have no effect with some sources.
≥You may experience a reduction in sound quality when
these sound effects are used with some sources. If this
occurs, turn the sound effects off.
14
RADIO
RADIO, EXT-IN
DVD
USB
EXT-IN
SETUP
DVD/CD (
11)
Each time you press the button:
FM (
12)
AV:
For audio input through the
SCART (AV) terminal.
AUX
:
For audio input through the
§
AUX terminal.
D-IN
:
For audio input through the
§
OPTICAL IN terminal.
(
right)
MUSIC P.:
For audio input through
MUSIC PORT. (
"(TV)" will appear beside "AUX" or
§
"D-IN", indicating the TV audio
setting for VIERA Link "HDAVI
Control" (
22).
USB (
24)
+,
VOL
VOL
SURROUND
SOUND
SOUND
OK
OK
SETUP
W.SRD
W.SRD
-CH SELECT
[Note]
Confirm the audio connection to the SCART (AV), AUX or
OPTICAL IN terminal on this unit when you select the
corresponding sources (
to its minimum, and then adjust the volume of this unit.
Making settings for digital audio input
Select to suit the type of audio from the OPTICAL IN
terminal on this unit.
1 While in "D-IN" mode
Press [SETUP] to select "MAIN/SAP", "DRC" or
"PCM FIX".
2 While the selected mode is displayed
Press [3, 4] to make the setting.
MAIN/SAP mode (Only works with Dolby Dual Mono):
MAIN, SAP
§
"SAP" = Secondary Audio Program
§
Dynamic Range Compression
DRC ON:
DRC OFF:
PCM FIX mode
24)
PCM ON:
PCM OFF: Select when receiving Dolby Digital and
(When receiving true 5.1-channel surround sound, select
"PCM OFF".)
[Note]
≥Audio that is input through the OPTICAL IN terminal is
not output from the HDMI terminal.
≥Underlined items in the above paragraphs are factory
settings.

Enjoying surround sound effects

SURROUND
9). Reduce the volume on the TV
, MAIN+SAP
(stereo audio)
§
Adjust for clarity even when the volume is
low by compressing the range of the lowest
sound level and the highest sound level.
Convenient for late night viewing. (Only
works with Dolby Digital)
The full dynamic range of the signal is
reproduced.
Select when receiving only PCM signals.
PCM signals.
SURROUND OUTPUT indicator on
this unit will light up when there is
surround sound effect.
Each time you press the button:
STANDARD:
Sound is output as it was recorded/
encoded.
Speaker output varies depending on
the source.
MULTI-CH:
You can enjoy sound from the front
speakers, as well as the surround
speakers even when playing a 2-
channel sound or non-surround
sound.
MANUAL: (
15)

Advertisement

Table of Contents

   Related Manuals for Panasonic SC-PT170

This manual is also suitable for:

Sc-pt175

Comments to this Manuals

Symbols: 0
Latest comments: