Printer Driver Settings - Olivetti d-Copia 120 Online Manual

2

Printer Driver Settings

To view Help for a setting, click the ( ) button in the upper right-hand corner of the window and then click the setting.
The Olivetti d-Copia 150 printer driver setup screen is shown below. The settings and the image of the unit will vary
depending on the model.
Note
Tab
Index which allows you to
switch between the various
setup screens.
The settings you made at
"N-Up Printing", "Fit To Paper
Size", "Image Orientation"
and "Watermark" are shown
in this image.
The tray selected in
"Paper Selection" in the
"Paper" tab appears in
blue. You can also click
on a tray to select it.
"OK" button
Click this button to save
your settings, and exit the
dialog box.
"Cancel" button
Click this button to exit the dialog
box without making any changes to
the settings.
( ) button
Click this button and then click a
setting to view Help for the setting.
You can also view Help by
right-clicking the setting
Note
with the mouse.
Drop-down list
Allows you to make one
selection from a list of choices.
Check box
Click this option to activate/
deactivate each function.
"Apply" button
Click to save your settings
without closing the dialog box.
Windows NT 4.0 does not
have the "Apply" button
Note
on each screen.
The "Apply" button does
not appear when you
open this window from an
application.
CONTENTS
INDEX
5