ZyXEL Communications P-2612HW Series Quick Start Quide page 12

3. In the Status screen click Network in the left panel then click
Wireless LAN. In the Wireless LAN screen click the WPS Station
tab.
4. Enter the PIN of the other WPS-enabled device into the Input
Station's PIN number text box and click Start. You can locate this
PIN number in the other device's utility or on the device itself. See the
other device's documentation if you cannot locate the PIN.
5. Click Start or Apply in the other device's utility screen within two
minutes of clicking Start in the P-2612HW Series web configurator
screen.
6. The P-2612HW Series and the other WPS-enabled device establish a
secure connection. This can take up to two minutes.
7. Congratulations! Your computer is now ready to connect to the
Internet wirelessly through your P-2612HW Series.
Set Up a Wireless Network Manually
Configure wireless devices to use the same wireless settings as the P-
2612HW Series. If you didn't configure the P-2612HW Series's wireless
settings, use the wireless SSID (network name) and WPA-PSK
encryption key on the P-2612HW Series's rear panel. The connection
procedure is shown here using Windows XP as an example.
12