ZyXEL Communications P-2612HW Series Quick Start Quide page 11

Push Button Configuration
1. Place a WPS-enabled device that supports the WPS Push Button
method within range of the P-2612HW Series.
2. Press the WLAN button on the P-2612HW Series's top panel for five
seconds.
3. Use the other WPS-enabled device's WPS button. It can be either a
button in the utility or a physical button. See the device's
documentation if you cannot locate the WPS button. It doesn't matter
which button is pressed first. You must press the second button within
two minutes of pressing the first one.
4. The P-2612HW Series and the wireless device establish a secure
connection. This can take up to two minutes.
5. Congratulations! Your computer is now ready to connect to the
Internet wirelessly through your P-2612HW Series.
PIN Configuration
1. Place a WPS-enabled device that supports the WPS PIN
configuration method within range of the P-2612HW Series.
2. Log into the P-2612HW Series's web configurator at http://
192.168.1.1 (see
on this).
Wizard Configuration
ENGLISH
on page 7 for more details
11