Ignition Sense Cable; Connecting The Kct-46 Cable To The Transceiver; Installation - Kenwood NX-800 Service Manual

NX-800
1. Ignition Sense Cable (KCT-46 : Option)
The KCT-46 is an optional cable for enabling the ignition
function. The ignition function lets you turn the power to the
transceiver on and off with the car ignition key.

1-1. Connecting the KCT-46 cable to the transceiver

1. Open the KCT-46 fuse holder and insert a mini blade fuse
(3A). ( q )
2. While holding a clear protective cover, remove the black
cap at the end of the yellow cable (ignition sense cable) of
the transceiver. ( w )
3. Connect the plug of the KCT-46 to the yellow cable termi-
nal of the transceiver. ( e )
4. Connect the other end of the KCT-46 to the ignition line of
the car. ( r )
Note : You must setup using the KPG-111D.
8

INSTALLATION

w
e
F52-0019-05
q
r
Fig. 1
Ignition line
of the car