Operating Instructions - lifeSMART LS-1000X-4M Manual

OPERATING INSTRUCTIONS

1 . Turn the heater on or off by pressing the Power
button on the control panel (C) or by pressing the
ON/OFF button on the remote control (B) .
Once the power is off, heating elements will stop
working first. The fan will continue working for up to 3
minutes to dispense residual heat inside the heater .
This is a normal function .
2 . Select a heat setting by pressing the MODE button
on either the control panel (C) or the remote control
(B) to toggle between the three heat settings .
Power for heat-up mode is 1,500 W; heat-down is
750 W . ECO mode is an Economic Energy Saving
Function . When ECO mode is chosen, the heater will
operate to maintain a constant warm 68°F
3 . Set the thermostat by pressing the arrows on the
control panel (C) or the remote control (B) .
You can set the temperature on the heater anywhere
between 59°F and 86°F or between 15°C and 30°C .
Once you have chosen the desired temperature,
the heater will remain on until the room temperature
increases to the temperature on the digital display .
The heater will cycle on and off to maintain the
desired room temperature .
Press the °C/°F button on the control panel (C)
or remote control (B) to switch the digital display
indicator on the heater between Fahrenheit and
Celsius .
1
ON/OFF
2
MODE
HIGH
3
C
C
11
C
ON/OFF
C
MODE
LOW ECO
TEMP. TEMP.
DOWN UP
OR
°C
°F
°C/°F
B
B
B
B