GE Dryers Owner's Manual page 10

About cycle options.
DRYING DAMP COOL DOWN
DELAY CLEAN LINT FILTER
H 3 S
OLD EC
M C
Y YCLE
S
TO TORE
10
NOTE: Not all features are available on all dryer models.
Lock
You can lock the controls to prevent any
selections from being made. Or you can
lock the controls after you have started
a cycle.
Children cannot accidentally start the dryer
by touching pads with this option selected.
Estimated Time Remaining
Displays the approximate time remaining
until the end of the cycle.
As the cycle begins, you will see an initial
approximate total cycle time in the display.
Then lights will "race" in the display. This
means the dryer is continuously monitoring
the amount of moisture in the load. The
lights will continue until the dryer senses
a low level of moisture in the load. At that
point, the dryer will calculate and display
the approximate time remaining.
My Cycle
(on some models)
To save a favorite cycle, set the desired
settings and hold down the MY CYCLE
button for 3 seconds. A beep will sound
to indicate the cycle has been saved.
To use your custom cycle, press the MY
CYCLE button before drying a load.
To lock the dryer, press and hold the lock
icon for 3 seconds. To unlock the dryer,
press and hold the lock icon for 3 seconds.
The icon of the lock next to the timer will
light up when the controls are locked.
To change the saved cycle, set the desired
settings and hold down the MY CYCLE
button for 3 seconds.
See page 8 for more details.