Changing The Network Settings - Bosch VG4-200 User Manual

VG4 Modular Camera System
10. Install the software packages using the procedure below:
11. Launch Microsoft Internet Explorer and navigate to the URL of an IP-enabled VG4
12. Launch the Configuration Manager utility and verify that the IP-enabled VG4 AutoDomes
8.5.1

Changing the Network Settings

The IP Module has a default IP address of 192.168.0.1. To change the IP address or any
network settings, you can use the Configuration Manager software supplied on the CD or the
IP AutoDome Web Server.
NOTICE!
Contact your local network administrator for a valid IP address, Subnet Mask, and a Gateway
IP Address.
Using the Configuration Manager
Configuration Manager is an optional network utility provided on the Bosch Security Systems
Web site (see Section 8.5 Installing the Required Software, page 57). Use the Configuration
Manager Manual provided in the Documentation folder on the CD to make any configuration
changes.
NOTICE!
Depending on the PC network security settings, the user may have to add the new IP address
to the browser's trusted sites list for the IP AutoDome controls to operate.
Bosch Security Systems, Inc.
– Unzip the MPEG-ActiveXXX_enUS_E3366678923.zip and the
DirectXXXX_enUS_E2352554507.zip files. Ensure that you maintain the directory
structures for each software package.
– Double-click the jre-XXXX-windows-i586-p-s_xxXX_XXXXXXXXX.exe file to
initiate the Java installation.
– Follow the Java Installation Wizard instructions until the software is installed.
– Double-click dotnetfx_enUS_T5007298827.exe to initiate the .NET installation.
– Follow the .NET Installation Wizard instructions until the software is installed.
– Open the DirectXXXX directory. Then, double-click the dxsetup.exe file to initiate
the DirectX installation.
– Follow the DirectX Installation Wizard instructions until the software is installed.
– Double-click MPEGAx.exe to initiate the MPEG-ActiveX installation.
– Follow the MPEG-ActiveX Installation Wizard instructions until the software in
installed.
– Double-click SetupConfigManagerXXXXXXXXX_enUS_F4155139595.exe to initiate
the ConfigManager installation.
– Follow the ConfigManager Installation Wizard instructions until the software is
installed.
AutoDome. Ensure that you can see the live video in the Livepage.
in your security system are listed. (You may have to configure some settings in the
Configuration Manager.)
User's Manual
Using the IP AutoDome | en
F.01U.133.268 | 6.0 | 2010.03
59