Lens Settings Group 2; Advanced Mode: Ptz Ptz Settings Group; Ptz Settings Group 2 - Bosch VG4-200 User Manual

84 en | Configuring the IP AutoDome
10.25

Lens Settings Group 2

Digital Zoom
Digital zoom is a method of decreasing (narrowing) the apparent angle of view of a digital
video image. It is accomplished electronically, without any adjustment of the camera's optics,
and no optical resolution is gained in the process. Select Off to disable or On to enable this
feature. The default setting is On.
Zoom Polarity
Capability to reverse the operation of the zoom button on the controller.
–
–
Focus Polarity
–
–
Iris Polarity
Capability to reverse the operation of the iris button on the controller.
–
–
10.26 Advanced Mode: PTZ
10.27 PTZ Settings Group 1
Auto Pan Speed
Continuously pans the camera at a speed between right and left limit settings. Type a value
between 1 and 60 (expressed in degrees), inclusive. The default setting is 30.
Standard Tour Period
Controls the waiting time until the dome moves to the next scene. Select a time period. The
default is 5 seconds.
PTZ Fixed Speed
Controls the pan, tilt, zoom with a fixed speed value. Type a value between 1 and 15,
inclusive. The default setting is 4.
Inactivity
Selects the time period the dome must be not controlled until the inactivity event will be
executed.
–
–
–
Inactivity Period
Determines the behavior of the dome when the control for dome is inactive. Select a time
period from the pull-down list (3 sec. - 10 min.). The default setting is 2 minutes.
Auto Pivot
The Auto Pivot tilts the camera through the vertical position as the camera is rotated to
maintain the correct orientation of the image. Set the Auto Pivot to On (default) to
automatically rotate the camera 180º when following a subject traveling directly beneath the
camera. To disable this feature, click Off.
F.01U.133.268 | 6.0 | 2010.03
Normal (default): zoom controls operate normally.
Reverse: zoom controls are reversed.
Normal (default): focus controls operate normally.
Reverse: focus controls are reversed.
Normal (default): iris controls operate normally.
Reverse: iris controls are reversed.
Off (default): camera remains on a current scene indefinitely.
Scene 1: camera returns to Preset 1.
Previous Aux: camera returns to the previous activity.
User's Manual
VG4 Modular Camera System
Bosch Security Systems, Inc.