Changing The Network Settings - Bosch VG4 200 Series User Manual

42 en | Configuring and Using the IP AutoDome
4.
5.
8.5.1

Changing the Network Settings

The IP Module has a default IP address of 192.168.0.1. To change the IP address or any
network settings, you can use the Configuration Manager software supplied on the CD or the
IP AutoDome Web Server.
NOTICE! Contact your local network administrator for a valid IP address, Subnet Mask, and a
i
Gateway IP Address.
Using the Configuration Manager
Configuration Manager is an optional network utility provided on the AutoDome CD. To install
the Configuration Manager software, do the following:
1.
2.
NOTICE! Depending on the PC network security settings, the user may have to add the new IP
i
address to the browser's trusted sites list for the IP AutoDome controls to operate.
Using the IP AutoDome Web Server
The IP AutoDome incorporates a network video server in the IP module.
To configure the camera using the IP AutoDome Web server, do the following:
1.
2.
The Web browser opens the LivePage for the IP AutoDome; a security warning message is
displayed.
3.
4.
5.
6.
F01U073308 | 1.0 | 2007.09
Open the Tools folder, then open the DirectX9 folder, then open the DirectX9.0c folder
and double-click on the dxsetup.exe file. Follow the on-screen instructions to install
DirectX.
Open the Tools folder, then open the Java VM folder and double-click the executable file.
Follow the on-screen instructions to install Java.
Browse to the CD and double click on the executable file. Follow the on-screen
instructions to install the Configuration Manager and .NET Framework if required.
Use the Configuration Manager Manual provided in the Documentation folder on the CD
to make any configuration changes.
Set the IP address on the PC to 192.168.0.10 to ensure that the PC and the IP
AutoDome are on the same Subnet.
Launch Microsoft Internet Explorer and navigate to the following URL:
http://192.168.0.1
Check the Always Trust box, then click YES.
Click the Settings link, located at the top of the LivePage.
Click the Service Settings link, located in the left pane of the Settings window.
Click the Network link to open the Network Settings page.
VG4-200, VG4-300, VG4-500i Series User's Manual
AutoDome Modular Camera System
Bosch Security Systems, Inc.