Bosch VG4-200 User Manual page 24

24 en | On-Screen Display Menu Navigation
Rule # Choices:
Menu
Exit
Enabled
Input
Output
NOTICE! You can include up to four (4) Input and Output events in a single rule. Each input
and output, however, must be true for the alarm's rule to be valid and enabled.
F.01U.133.268 | 6.0 | 2010.03
Description
Saves and exits the menu.
Turns the rule on or off after
its inputs and outputs have
been defined.
Toggles through a list of valid
inputs set in the Alarm I/O
Setup > Inputs Setup Menu
that define the rule's inputs.
A rule can have up to four (4)
inputs.
Toggles through a list of valid
outputs set in the Alarm I/O
Setup > Outputs Setup
Menu that defines a rule's
outputs.
User's Manual
VG4 Modular Camera System
Sub-menu / Description
YES to enable or NO to disable
Alarm Inputs 1 – 7 and any
additional inputs which were set in
the Inputs Setup Menu, including
Aux On/Off (1-99), Shot, Low
Pressure‡ and NONE.
Alarm Outputs 1 – 3 and any
additional outputs set in the
Outputs Setup Menu including:
Alarm Relay, Aux On/Off (1-99),
Shot, OSD, Transmit, and NONE.
Some outputs, such as Alarm
Outputs 1-3, Alarm Relay, and Aux
On/Off can be set to be active for a
specific duration of time as follows:
Seconds: 1-5, 10, 15, or 30
Minutes: 1-5 or 10
Latched: The alarm stays active
until acknowledged.
Follows: The alarm follows the
alarm rule.
Bosch Security Systems, Inc.
Default
Setting
NO
NONE
NONE