Table of Contents
Advertisement
MIC412TI and MIC412TF Camera | Installation and Operation Manual
Zoom In
and
Zoom Out
lens at a fixed rate.
Latch
PTZ: This tickbox will Latch the PTZ controls for continuous tilt or rotation
as required.
Iris Controls
Auto Iris
lets the MIC automatically adjust to changing light levels, where
Iris
gives the user control with
Open
Focus Controls
Auto Focus
lets the MIC automatically focus on a changing scene, where
Focus
gives the user control with
Near
Bosch Security Systems
control the zoom position of the camera
Manual
and
Close
buttons.
Manual
and
Far
buttons.
Auxiliaries
Slow
Zoom: Reduces the speed at which the MIC zooms.
PTZ
Scale: Scales the MIC speed dependant on zoom position.
Wiper: Turns on or off the MIC wiper if fitted.
Washer: Activates the washer relay on the MIC-WKT card or the MIC-ALM card if
fitted in the PSU. This also moves the MIC to the stored
turns on the wiper. Once de-activated the MIC will return to its original position and
turn off the wiper.
IR /
Thermal: Dependant on the MIC this will do one of 3 things, for a Non-IR
Standard MIC the IR cut filter will come in and the image will go black and white.
For a twin IR MIC, the cut filter will come in and the lamps will turn on.
Note: If the lamps do not turn on, ensure the power supply is an IR version and
that
Auto Alarm
and
Multi Alarms
For a MIC412, the video output will switch from the Sony module to the thermal
module; the controls on the
Digital
Zoom: This will enable the MIC to continue into the digital zoom once the
optical limit has been reached. This also needs to have
under the
MIC Setup
tab.
Auto
Pan: This will start the MIC panning between left and right defined limits.
On Screen
Data: This activates the Sony modules on screen icons.
Preset Positions
Issue 8
AAA
WashWipe
in the
MIC Setup
tab are both turned on.
Thermal
tab will also now function.
Digital Zoom Enabled
EN | 26
position and
Advertisement
Table of Contents
