Table of Contents
Advertisement
26
en | Configuration
Item
VMD
sensitivity
OSD alarm
text
EXIT
Selecting an area for VMD masking
To set-up an area for VMD masking, access the area menu by
selecting the VMD Area option from the VMD menu. Upon
entering the Area menu, the current area is displayed with the
upper left corner flashing. The flashing corner of the image can
be moved with the Up, Down, Left, Right arrow keys. Pressing
the Select key moves the flashing cursor to the opposite corner,
which can now be moved. Pressing Select again freezes the
area and exits the area menu.
There is one programmable VMD area.
Note:
When VMD is enabled, normal light fluctuations or
environmental factors can contribute to false-positive alarms.
Because of this, it is recommended to not connect the VMD-
triggered alarm output of the camera to a monitored alarm
system, as the false-positive alarms may be considered a
nuisance.
F.01U.163.823 | v1.0 | 2010.01
Selection
Alphanumeric
Installation and Operation manual
Description
Sets the sensitivity for motion to the
desired level. The longer the white bar,
the more motion is required to acitvate
the VMD alarm. Motion above this level
activates alarm.
Text for on-screen display alarm (16
characters maximum).
Returns to main menu.
Dinion Day/Night Camera
Bosch Security Systems
Advertisement
Table of Contents
