32
en | Installation
5.8.2
Tilt
For vertical adjustment (tilt):
1.
2.
3.
4.
5.
AM18-Q0615 | v1.0 | 2012.10
Loosen the two screws in the camera module wings with
the supplied screwdriver bit (1).
Swing the camera module between the wings. Do not
rotate more than 100°.
Tighten the two screws in the camera module wings with
the supplied screwdriver bit (1).
For extra secure locking, tighten (hand-tight) the two
socket head screws in the side of the camera module
wings with the supplied allen key (2).
Click the two wing covers into place.
x2
x2
Installation Manual
FLEXIDOME HD
x2
Bosch Security Systems