Bosch NDN-733 Installation Manual

Flexidome hd 720p60
Hide thumbs Also See for NDN-733:

Advertisement

Quick Links

FLEXIDOME HD 720p60
NDN-733
en
Installation Manual

Advertisement

Table of Contents
loading

Summary of Contents for Bosch NDN-733

  • Page 1 FLEXIDOME HD 720p60 NDN-733 Installation Manual...
  • Page 3: Table Of Contents

    3.1.6 Alarm I/O 3.1.7 Tamper detection and motion detection 3.1.8 Video encoding 3.1.9 Multicast 3.1.10 Power-over-Ethernet 3.1.11 Encryption 3.1.12 Recording 3.1.13 Configuration Operation with external systems Planning Unpacking System requirements Bosch Security Systems Installation Manual AM18-Q0615 | v1.0 | 2012.10...
  • Page 4 Closing the unit Camera configuration User modes Day/Night switching Browser connection Protected network Troubleshooting Function test Resolving problems Customer service Maintenance Testing the network connection Repairs 9.2.1 Transfer and disposal AM18-Q0615 | v1.0 | 2012.10 Installation Manual Bosch Security Systems...
  • Page 5 FLEXIDOME HD Table of Contents | en Technical Data 10.1 Specifications 10.1.1 Dimensions Bosch Security Systems Installation Manual AM18-Q0615 | v1.0 | 2012.10...
  • Page 6: Safety

    60950. The power supply must be a SELV-LPS unit or a SELV - Class 2 unit (Safety Extra Low Voltage - Limited Power Source). CAUTION! The camera must be connected to earth. AM18-Q0615 | v1.0 | 2012.10 Installation Manual Bosch Security Systems...
  • Page 7: Important Safety Instructions

    Equipment change or modification could void the user's guarantee or authorization agreement. Connect the yellow/green earth wire of the camera to the system earth of the installation to ensure correct safety and EMC/RFI protection. Bosch Security Systems Installation Manual AM18-Q0615 | v1.0 | 2012.10...
  • Page 8: Connection In Applications

    If auxiliary power (12 VDC or 24 VAC) and PoE is applied simultaneously, the camera selects auxiliary input and shuts off the PoE. Type label The type label is located on the rear of the camera module. AM18-Q0615 | v1.0 | 2012.10 Installation Manual Bosch Security Systems...
  • Page 9: Fcc & Ices Compliance

    The user may find the following booklet, prepared by the Federal Communications Commission, helpful: "How to Identify and Resolve Radio-TV Interference Problems". This booklet is available from the U.S. Government Printing Office, Washington, DC 20402, Stock No. 004-000-00345-4. Bosch Security Systems Installation Manual AM18-Q0615 | v1.0 | 2012.10...
  • Page 10: Microsd Cards

    | Safety FLEXIDOME HD MicroSD cards Bosch Security systems recommends that local storage on microSD card should only be used for alarm recording and Automatic Network Replenishment (ANR) applications. To minimize the risk of loss of digital information, we recommend multiple, redundant recording systems, and a procedure to back up all digital information.
  • Page 11: Bosch Notices

    Bosch notices Video loss Video loss is inherent to digital video recording; therefore, Bosch Security Systems cannot be held liable for any damage that results from missing video information. To minimize the risk of lost digital information, Bosch Security Systems recommends multiple, redundant recording systems, and a procedure to back up all analog and digital information.
  • Page 12: Copyrights

    Digital Equipment Corporation not be used in advertising or publicity pertaining to distribution of the software without specific, written prior permission. This software is based in part on the work of the Independent JPEG Group. AM18-Q0615 | v1.0 | 2012.10 Installation Manual Bosch Security Systems...
  • Page 13: Introduction

    – Integrated Ethernet interface (10/100 Base-T) – Power-over-Ethernet (PoE) – Password protection – Integrated Web server for live viewing and configuration via a browser – Firmware update through flash memory Bosch Security Systems Installation Manual AM18-Q0615 | v1.0 | 2012.10...
  • Page 14: System Information

    The camera complies to the ONVIF standard which means that it is easier to install and integrate into larger systems. The ONVIF standard is a global standard for the interface of network video products. AM18-Q0615 | v1.0 | 2012.10 Installation Manual Bosch Security Systems...
  • Page 15: Audio

    Web browser connections can be protected using HTTPS. Protect the control channels via the SSL encryption protocol. With an additional license, the user data itself can be encrypted. Bosch Security Systems Installation Manual AM18-Q0615 | v1.0 | 2012.10...
  • Page 16: Recording

    (Intranet) or from the Internet. Similarly, firmware updates and rapid loading of device configurations are also possible. Configuration settings can be stored as files on a computer and copied from one camera to another. AM18-Q0615 | v1.0 | 2012.10 Installation Manual Bosch Security Systems...
  • Page 17: Operation With External Systems

    The Bosch Video Management System is a unique enterprise IP video surveillance solution that provides seamless management of digital video, audio, and data across any IP network. It is designed to work with Bosch CCTV products as part of a total video surveillance management system. Bosch Video Client The camera video server and the Bosch Video Client software combine to provide a high-performance system solution.
  • Page 18: Planning

    Microsoft Internet Explorer web browser version 9 -or- – Computer with network access and reception software, for example Bosch Video Client, Bosch Video Management System, or Bosch Recording Station AM18-Q0615 | v1.0 | 2012.10 Installation Manual Bosch Security Systems...
  • Page 19: Installation

    National Electrical Code or applicable local codes. Parts The camera/housing unit consists of the following parts: Mounting base Surface mount ring Camera module with fixing ring Bosch Security Systems Installation Manual AM18-Q0615 | v1.0 | 2012.10...
  • Page 20: Mounting The Unit

    Drill three holes with a diameter of 8 mm (0.3 in). Insert the supplied plugs into the holes. Attach the mounting base securely to the surface using the three supplied screws. AM18-Q0615 | v1.0 | 2012.10 Installation Manual Bosch Security Systems...
  • Page 21 Place the surface mount ring over the cable tree. Suspend the camera module from the plastic hook inside the mounting base ensuring that the suspension cable is seated securely in the groove. Bosch Security Systems Installation Manual AM18-Q0615 | v1.0 | 2012.10...
  • Page 22: Flush Mount

    Cut out the recess. Drill three holes with a diameter of 8 mm (0.3 in). Insert the supplied plugs into the holes. Attach the mounting base securely using the three supplied screws. AM18-Q0615 | v1.0 | 2012.10 Installation Manual Bosch Security Systems...
  • Page 23 FLEXIDOME HD Installation | en Suspend the camera module from the plastic hook inside the mounting base ensuring that the suspension cable is seated securely in the groove. Bosch Security Systems Installation Manual AM18-Q0615 | v1.0 | 2012.10...
  • Page 24: Connections

    Alarm In 1 Violet Alarm In 2 White Audio In (Shield) Ground (Audio In) Black Audio Out (Shield) Ground (Audio Out) For connections use wires of at least the same thickness. AM18-Q0615 | v1.0 | 2012.10 Installation Manual Bosch Security Systems...
  • Page 25 (use a bounce-free contact system). – Refer to the cable tree table to identify the wire colors for connecting the alarm input. – Configurable as active low or active high. Bosch Security Systems Installation Manual AM18-Q0615 | v1.0 | 2012.10...
  • Page 26 Audio in: Line input level (not suitable for direct microphone signal). Audio out: Line output level (not suitable for direct speaker connection). Wiring: Shielded audio connection cable is advised. AM18-Q0615 | v1.0 | 2012.10 Installation Manual Bosch Security Systems...
  • Page 27: Mount The Camera Module

    Align the screws in the fixing ring with the raised holes in the mounting base. – Tighten the three screws with the supplied screwdriver bit (maximum torque 1 N-m). > 1 N-m > 1 N-m Bosch Security Systems Installation Manual AM18-Q0615 | v1.0 | 2012.10...
  • Page 28: Opening The Camera Module

    Using the supplied screwdriver bit, loosen the two screws securing the camera window section of the camera module. Carefully, allow the camera window section to hang loose on the earth wire. AM18-Q0615 | v1.0 | 2012.10 Installation Manual Bosch Security Systems...
  • Page 29: Controls

    10 seconds to restore the factory defaults. 4. MicroSD card slot Insert a microSD card into the slot. Bosch Security Systems Installation Manual AM18-Q0615 | v1.0 | 2012.10...
  • Page 30: Camera Set-Up

    (Position of these controls might differ depending on the lens type. To use the full extension of the focus range, use the lens slip ring or the auto back focus mechanism.) AM18-Q0615 | v1.0 | 2012.10 Installation Manual Bosch Security Systems...
  • Page 31: Camera Positioning

    Rotate the camera module in the base. Do not rotate more than 180° in either direction. Tighten the three screws in the fixing ring with the supplied screwdriver bit. Bosch Security Systems Installation Manual AM18-Q0615 | v1.0 | 2012.10...
  • Page 32: Tilt

    For extra secure locking, tighten (hand-tight) the two socket head screws in the side of the camera module wings with the supplied allen key (2). Click the two wing covers into place. AM18-Q0615 | v1.0 | 2012.10 Installation Manual Bosch Security Systems...
  • Page 33: Twist

    Installation | en 5.8.3 Twist To obtain a horizontal horizon (for tilted ceilings or sidewall mounting), push and turn the green lever as necessary to align the picture shown on the monitor. Bosch Security Systems Installation Manual AM18-Q0615 | v1.0 | 2012.10...
  • Page 34: Using The Install Wizard

    Manually adjust the focus on the lens to obtain the sharpest image possible. To rotate the image 180°, press and hold the Menu button until the image flips. AM18-Q0615 | v1.0 | 2012.10 Installation Manual Bosch Security Systems...
  • Page 35: Closing The Unit

    – the rubber gasket fits snugly. Using the supplied screwdriver bit, secure the camera window section to the camera module by tightening the two screws (maximum torque 3.5 N-m). Bosch Security Systems Installation Manual AM18-Q0615 | v1.0 | 2012.10...
  • Page 36: Camera Configuration

    When the auto mode is selected and the switching level is set to -15, certain borderline scene lighting conditions can cause the camera to switch back and forth between day and night modes. Set a different switching level to avoid this. AM18-Q0615 | v1.0 | 2012.10 Installation Manual Bosch Security Systems...
  • Page 37: Browser Connection

    The configuration options using the menu system of the camera itself are limited to setting up the lens and network. Note: The camera can also be configured using the supplied Bosch Video Client or the Bosch Video Management System. Protected network If a RADIUS server is used for network access control (802.1x...
  • Page 38: Troubleshooting

    Can you connect to the camera remotely? – Does the camera transmit all the data required? – Does the camera respond as desired to alarm events? – Is it possible to control peripheral devices, if necessary? AM18-Q0615 | v1.0 | 2012.10 Installation Manual Bosch Security Systems...
  • Page 39: Resolving Problems

    Faulty data transmission Check the data within the LAN. transmission with ping. The maximum number of Wait until there is a free connections has been connection and call the reached. transmitter again. Bosch Security Systems Installation Manual AM18-Q0615 | v1.0 | 2012.10...
  • Page 40 Customer Service and firmware upload. file. replace if necessary. Incorrect firmware file. Enter the IP address of the unit followed by / main.htm in your Web browser and repeat the upload. AM18-Q0615 | v1.0 | 2012.10 Installation Manual Bosch Security Systems...
  • Page 41: Customer Service

    Customer service If a fault cannot be resolved, please contact your supplier or system integrator, or go directly to Bosch Security Systems Customer Service. The version numbers of the internal firmware can be viewed on a special page. Please note this information before contacting Customer Service.
  • Page 42: Maintenance

    Defective or superfluous devices and parts should be disposed of professionally or taken to your local collection point for hazardous materials. AM18-Q0615 | v1.0 | 2012.10 Installation Manual Bosch Security Systems...
  • Page 43: Technical Data

    Video Motion Analysis Motion+, IVA Lens type DC iris auto detect, SR (Super Resolution) Controls Via web browser or Configuration Manager Control feedback Actual shutter, Actual gain User modes 6 pre-defined customizable user modes Bosch Security Systems Installation Manual AM18-Q0615 | v1.0 | 2012.10...
  • Page 44 IP66, NEMA Type 4X Impact protection IK10 Operating -50 °C to +50 °C (-58 °F to +122 °F) temperature Non-IVA: -50 °C to +55 °C (-58 °F to +131 °F) AM18-Q0615 | v1.0 | 2012.10 Installation Manual Bosch Security Systems...
  • Page 45 FLEXIDOME HD Technical Data | en 10.1.1 Dimensions 140 (0.55) Ø208 (8.2) mm (in) Ø150 (5.9) Bosch Security Systems Installation Manual AM18-Q0615 | v1.0 | 2012.10...
  • Page 46 | Technical Data FLEXIDOME HD AM18-Q0615 | v1.0 | 2012.10 Installation Manual Bosch Security Systems...
  • Page 48 Bosch Security Systems www.boschsecurity.com © Bosch Security Systems, 2012...

This manual is also suitable for:

Flexidome hd ndn-733

Table of Contents