RAID Subsystem DVA-16K | Installation Manual
3.
Fig. 6.7 Installing the DIMM Module
4.
Bosch Security System
Re-insert the new DIMM module. Align the new DDR RAM DIMM module with the slot and
gently (but firmly) push it in. The white clips on either side of the slot should automati-
cally close and lock the new DIMM module into place. (See Figure 6.7)
Install the controller module. Once the new DIMM module has been installed, place the
controller module back in its original location. (See Section 6.2.3 Replacing the Controller
Module)
Subsystem Maintenance | en
F.01U.027.799 | V2 | 2008.08
47