Table of Contents
Advertisement
26
en | Subsystem Monitoring
Three (3) LEDs monitor the status of the system. The definitions of these LEDs are given
below.
Fig. 4.1 LCD Panel
PWR
(Power)
BUSY
ATTEN
(Attention)
Table 4.2 LCD Panel LED Definitions
NOTICE!
i
During the power up process, the LCD panel ATTEN LED will be turned on. If the subsystem
boots up correctly, then the ATTEN LED will be turned off after the boot-up procedure is com-
plete.
F.01U.027.799 | V2 | 2008.08
Name
Color
Blue
White
Red
RAID Subsystem DVA-16K | Installation Manual
Status
ON indicates that power is being supplied to the
subsystem.
OFF indicates that no power is being supplied to the
subsystem.
FLASHING indicates that there is activity on the
host/drive channels.
OFF indicates that there is no actively on the host/
drive channels.
ON indicates that a component failure/status event
has occurred.
OFF indicates that the subsystem and all its compo-
nents are operating correctly.
Bosch Security System
Advertisement
Table of Contents
