Standard CMOS Features
Select "Standard CMOS Features" from the main menu to configure the drives installed in your system.
The following screen shows the Disk Drives menu:
The following table describes the parameters found in this menu.
Parameter
Date
Time
IDE Channel 0 Master
IDE Channel 0 Slave
IDE Channel 1 Master
29
Description
Lets you set the date following the weekday-month-day-
year format
Lets you set the time following the hour-minute-second
format
Lets you configure the hard disk drive connected to the
master port of IDE channel 0.
To enter the IDE Channel 0 Master setup, press
The IDE CD-ROM is always automatically detected.
Lets you configure the hard disk drive connected to the
slave port of IDE channel 0.
To enter the IDE Channel 0 Slave setup, press
The IDE CD-ROM is always automatically detected.
Lets you configure the hard disk drive connected to the
master port of IDE channel 1.
To enter the IDE Channel 1 Master setup, press
The IDE CD-ROM is always automatically detected.
Options
Weekday: Sun, Mon....Sat
Month: Jan, Feb...Dec
Day: 1 to 31
Year: 1980 to 2079
Hour: 0 to 23
Minute: 0 to 59
Second: 0 to 59
(Show the Status:)
None
e
HDD or CD-ROM Number
.
(Show the Status:)
None
e
HDD or CD-ROM Number
.
(Show the Status:)
None
e
HDD or CD-ROM Number
.
Chapter 2