Standard Cmos Features - Acer AcerPower F6 Service Manual

Standard CMOS Features

The option displays basic information about the system. Press <Esc> to return to the main menu
setting page.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Date
Time
IDE Primary Master
IDE Primary Slave
S-ATA 1
S-ATA 2
S-ATA 3
S-ATA 4
Drive A
Halt On
Base Memory
Extended Memory
Total Memory
Date and Time
The Date and Time items show the current date and time set on the computer. If you are running
a Windows OS, these items are automatically updated whenever you make changes to the
Windows Date and Time Properties utility.
IDE Primary Master/Slave SATA 1~4
Your computer has one IDE channel and can be installed with one or two devices (Master and
Slave). Use this item to configure each device on the IDE channel. This main board features four
SATA connectors supporting four SATA drives. SATA refers to Serial ATA (Advanced Technology
Attachment), the standard interface for the IDE hard drives which are currently used in most PCs.
Drive A
The item defines the properties of any diskette drive attached to the system.
Halt On
This item defines the operation of the system POST (Power On Self Test) routine. YOu can use this
item to select which types of errors in the POST are sufficient to halt the system.
26
Standard CMOS Setup
Thu 07/13/2006
00: 01: 44
Not Detected
ATAPI CDROM
Not Detected
Not Detected
Not Detected
Not Detected
1.4 MB 3
All. But Keyboard
640K
383M
512M
Enter : Select
: Move
F1:General Help
1 / ''
2
F10: Save & Exit
+/-/: Value
F9: Optimized Defaults
Help Item
Use [ENTER], [TAB]
or [SHIFT-TAB] TO
select a field.
Use [+] or [-] to
configure system Time.
ESC: Exit
Chapter 2