Acer Veriton 7600GTR Service Manual page 66

(1) Create RAID Volume:
e
Select this option and press . The following screen appears:
v e
Specify a RAID Volume name and then press the or key to go to the next field.
Select the strip value for the RAID 0/1 array by scrolling through the available values by using the
w y e
or keys and pressing the key to select and advance to the next field.
The available values range from 4KB to 128 KB in power of 2 increments. The strip value should be
chosen based on the planned drive usage. Here are some suggested selections:
16 KB - Best for sequential transfers
64 KB - Good general purpose strip size
128 KB - Best performance for most desktops and workstations. The default value.
57 Chapter 2