Acer Veriton 7600G User Manual

Acer veriton 7600g: users guide
Hide thumbs Also See for Veriton 7600G:
Table of Contents

Advertisement

Veriton 7600G/7600GR
User's guide

Advertisement

Table of Contents
loading

Summary of Contents for Acer Veriton 7600G

  • Page 1 Veriton 7600G/7600GR User’s guide...
  • Page 2 Serial Number: ___________________________________ Purchase Date: ___________________________________ Place of Purchase: ________________________________ Acer and the Acer Logo are registered trademarks of Acer Inc. Other company’s product names or trademarks are used herein for identification purposes only and belong to their respective companies.
  • Page 3: Table Of Contents

    1 First things first System specifications Package contents Accessing the user’s guide 2 System tour Features Performance Multimedia Connectivity Front panel Rear panel Keyboard Internet/E-mail/Search keys Multimedia keys Volume control/Mute keys Lock keys Cursor keys Windows keys Function keys Palm rest Optical drive To take care of your CDs and DVDs Hard disk...
  • Page 4 Opening your computer To remove the side panel To replace the side panel Internal components System boards Mainboard layout Veriton 7600G mainboard layout Audio board Upgrading your computer Installing additional memory To remove a DDR DIMM To install a DDR DIMM...
  • Page 5 6 Frequently asked questions Frequently asked questions Appendix A: Notices Appendix B: Taking care of your computer Important tips Cleaning and servicing To clean your computer and keyboard To clean your pointing device To clean your monitor When to contact a service technician Asking for technical assistance Appendix C: RAID introduction( for R series model only) Intel ICH5R Serial ATA RAID Introduction...
  • Page 6 Contents...
  • Page 7: First Things First

    1 First things first...
  • Page 9 This chapter describes the system specifications and the contents of your computer package.
  • Page 10: System Specifications

    System specifications Component Specification Processor • • System Four SDRAM slots support a maximum of 4 GB memory dual-channel DDR memory Chipset • • Graphics Intel® 865G supporting: Audio AC’97 Codec Broadcom 5705 supporting 10/100/1000 MB connectivity 2 40 pin parallel ATA IDE slots 2 Serial ATA ports 1.44 MB 3.5 inch floppy drive PS/2...
  • Page 11 Component Specification • 5400 RPM • 7200 RPM Optical Drive CD-ROM, CD-RW, DVD-ROM, or DVD/CD-RW combo Operating • Windows® 2000 system • Windows® XP Home • Windows® XP Professional • Novell® • SCO® Unix • Red Hat® Linux Dimensions • Mini-Tower 424(H) /200(W) /414(D) Weight •...
  • Page 12: Package Contents

    Package contents Before you unpack your computer, make sure that you have enough space to set up your computer. Carefully unpack the carton and remove the contents. If any of the following items are missing or damaged, contact your dealer immediately: •...
  • Page 13: Accessing The User's Guide

    Accessing the user’s guide This user’s guide is also available on your computer as an Adobe Acrobat PDF file. To access the user’s guide (for Windows On the Windows ® select Help and Support Center. On the Help and Support Center home page, double-click the Veriton 7600 series Online icon.
  • Page 14 1 First things first...
  • Page 15: System Tour

    2 System tour...
  • Page 17 This chapter discusses the features and components of your computer.
  • Page 18 2 System tour...
  • Page 19: Features

    Features Here are just a few of your computer’s many features: Performance • Intel Pentium 4 supporting FSB up to 800 MHz ® ® • Intel Celeron CPU supporting FSB up to 400 MHz ® ® • Intel HyperThreading Technology ®...
  • Page 20 • One parallel port • One VGA port • Eight Universal Serial Bus (USB) 2.0 ports (two internal, two on the front and four on the rear panel) • High-speed V.92, 56K Fax/modem (optional) • Broadcom 5705 10/100/1000 MB Gigabit Ethernet LAN support with remote wake-up function 2 System tour...
  • Page 21: Front Panel

    Front panel Your computer’s front panel consists of the following:...
  • Page 22 Label Icon Component Optical drive tray Stop/Eject button Optical drive emergency eject slot Optical drive activity light-emitting diode (LED) Hard disk activity LED LAN activity LED Power LED Power button One touch recovery button Volume control Optical drive Headphone/Earphone port 5.25-inch drive bays 3.5-inch floppy drive Floppy drive LED...
  • Page 23: Rear Panel

    Rear panel Your computer’s rear panel consists of the following:...
  • Page 24 Label Icon Color Burgundy White Blue Green Purple Black Teal or Turquoise Blue Pink Lime Light blue For information on how to connect the peripherals, see page 38 and “Connecting options” on page 46. Component Power cord socket Voltage selector switch Power supply Parallel/Printer port Network port...
  • Page 25: Keyboard

    Keyboard The keyboard has full-sized keys that include separate cursor keys, two Windows keys, and twelve function keys. For information on how to connect your keyboard, see “Connecting your keyboard” on page 40. Description Sleep button Internet/E-mail/Search keys Multimedia keys Volume control/Mute keys Scroll lock key Num lock key...
  • Page 26: Internet/E-Mail/Search Keys

    Internet/E-mail/Search keys Icon browser Email Search Description Launches your current default browser. Launches your email application. Opens a search window. 2 System tour...
  • Page 27: Multimedia Keys

    Multimedia keys Allow you to conveniently play, pause, stop, step forward, or step back a song or movie using your keyboard. Icon Backward Play/ Pause Stop Forward Description Press to skip backward to the previous track or video file and start playing. Press to start playing the audio track or video file.
  • Page 28: Volume Control/Mute Keys

    Volume control/Mute keys Icon Volume Volume down Mute Description Press to increase audio volume. Press to decrease audio volume. Toggle sound on/off. 2 System tour...
  • Page 29: Lock Keys

    Lock keys The keyboard has three lock keys which you can toggle on and off to switch between two functions. Lock key Scroll Lock Num Lock Caps Lock Description When activated, the screen moves one line up or down when you press the up arrow or down arrow respectively.
  • Page 30: Cursor Keys

    2 System tour Cursor keys The cursor keys, also called the arrow keys, let you move the cursor around the screen. They serve the same function as the arrow keys on the numeric keypad when the Num Lock is toggled off.
  • Page 31: Windows Keys

    Windows keys The keyboard has two keys that perform Windows-specific functions. Windows logo key Application key Description Start button. Combinations with this key perform special functions, such as: • Windows + Tab: Activate the next Taskbar button • Windows + E: Explore My Computer •...
  • Page 32: Function Keys

    2 System tour Function keys The function keys, F1 - F12, let you perform specific functions, depending on the application that uses them. Palm rest The detachable palm rest provides you a comfortable place to rest your hands while typing.
  • Page 33: Optical Drive

    Optical drive Your computer may come with a CD-ROM, DVD-ROM or a combo DVD/CD-RW drive. This drive is located on the front panel of your computer. The CD-ROM drive allows you to play different types of compact discs (CDs). The DVD-ROM drive allows you to play not only old CD-ROMs, CD-I discs, and video CDs, but digital video discs (DVDs) as well.
  • Page 34: To Take Care Of Your Cds And Dvds

    When the disc tray slides open, place the CD or DVD gently on the tray. Make sure that the label or title side of the disc is facing upward. When holding a disc, hold it by the edges to avoid leaving smudges or fingerprints. Push the eject button again to close the tray.
  • Page 35: Hard Disk

    Hard disk Your computer is preinstalled with a high-capacity Enhanced- IDE (E-IDE) hard disk. For instructions on how to upgrade or replace your hard disk, see “Replacing the hard disk” on page 73.
  • Page 36 2 System tour...
  • Page 37: Setting Up Your Computer

    3 Setting up your computer...
  • Page 39 This chapter contains step-by-step instructions on how to set up your computer and connect additional peripherals.
  • Page 40 3 Setting up your computer...
  • Page 41: Arranging A Comfortable Work Area

    Arranging a comfortable work area Working safely begins with the arrangement of your work space and the proper use of equipment. For this reason, it is very important to take time and think about how you are going to arrange your work area. Refer to the diagram on the following page as you set up your system.
  • Page 42: Positioning Your Monitor

    Positioning your monitor Place your monitor at a comfortable viewing distance, usually 50 to 60 centimeters away. Adjust the display in such a way that the top of the screen is at or slightly below eye level. Positioning your keyboard The location of the keyboard is a very important factor to your posture.
  • Page 43: Positioning Your Mouse

    typing with a light touch. If you feel any shoulder or neck strain, stop for a while and check your posture. • Position your keyboard in front of your monitor. Putting your keyboard beside your monitor will make you turn your head while you type which could add tension to your neck muscles that may later result in neck strain.
  • Page 44: Connecting Peripherals

    Connecting peripherals Setting up your computer is easy. For the most part, you only have four things to connect: the mouse, the keyboard, the monitor, and the power cable. Note: The peripherals shown in the connections below are for your reference only. Actual device models may vary in select countries.
  • Page 45: Ps/2 Mouse

    PS/2 mouse Plug the PS/2 mouse cable into the PS/2 mouse port (green port) located on the rear panel of your computer.
  • Page 46: Connecting Your Keyboard

    3 Setting up your computer Connecting your keyboard USB keyboard Plug your USB keyboard cable into any of the USB ports (black port) located on the front and rear panels of your computer.
  • Page 47: Ps/2 Keyboard

    PS/2 keyboard Plug your PS/2 keyboard cable into the PS/2 keyboard port (purple port) located on the rear panel of your computer.
  • Page 48: Connecting A Monitor

    Connecting a monitor To connect a monitor, simply plug the monitor cable into the monitor port (blue port) located on the rear panel of your computer. Note: Refer to the monitor manual for additonal instructions and information. 3 Setting up your computer...
  • Page 49: Connecting The Power Cable

    Connecting the power cable Caution: Before you proceed, check the voltage range in your area. Make sure that it matches your computer’s voltage setting. If they don’t match, change your computer’s voltage setting according to your area’s voltage range. Set the voltage selector switch to the voltage range applicable to your area (a).
  • Page 50: Turning On Your Computer

    Turning on your computer After connecting the necessary peripherals and plugging in the power cable, you are now ready to turn the computer on and get to work. To turn on your computer: Turn on all peripherals connected to your computer such as the monitor, printer, fax, speakers, etc.
  • Page 51: Turning Off Your Computer

    Turning off your computer To turn off your computer, follow the steps below. For Windows® XP: On the Windows® XP taskbar, click on the Start button, and click Turn Off Computer; then click Turn Off. Turn off all peripherals connected to your computer. For Windows®...
  • Page 52: Connecting Options

    Connecting options Connecting your printer Your computer supports parallel, serial and USB printers. To connect a parallel printer, plug the printer cable into the parallel port (burgundy port) located on the rear panel of your computer. Note: The printer shown below is for your reference only. Actual device model may vary by country.
  • Page 53: Connecting The Modem (Optional)

    Connecting the modem (optional) Set up your modem connection by plugging the telephone line and handset line into their corresponding ports on the rear panel of your computer.
  • Page 54: Connecting To The Network

    Connecting to the network You can connect your computer to a Local Area Network (LAN) using a network cable. To do so, simply plug the network cable into the network port computer. Note: Consult your network system administrator or operating system manual for information on how to configure your network setup.
  • Page 55: Connecting Multimedia Devices

    Connecting multimedia devices You can connect multimedia devices such as microphone, earphone or headphone, external speakers, and audio line-in device. These devices will allow you to take advantage of your computer’s multimedia features Note: The multimedia devices shown below are for your reference only.
  • Page 56 • earphones, headphones: connect to the Headphone-out jack (lime jack) located on the front panel of your computer To adjust the volume of the headphones, click the Volume icon located on the taskbar at the bottom of your screen. When the volume control pops up, drag the Volume control lever to the desired level.
  • Page 57 • external speakers: connect to the Audio-out/Line-out jack (lime jack) located on the rear panel of your computer.
  • Page 58 • audio line-in device: connects to the Audio-in/Line-in jack (light blue jack) located on the rear panel of your computer 3 Setting up your computer...
  • Page 59: Connecting Usb Devices

    Connecting USB devices Universal Serial Bus (USB) is a serial bus design that is capable of cascading peripherals such as a digital camera, keyboard, mouse, joystick, scanner, printer and modem. With USB, complex cable connections can be eliminated. Your computer comes with six external USB ports: two on the front and another four on the rear panel.
  • Page 60 3 Setting up your computer Note: Some USB devices have a built-in USB port which allows you to connect or daisy-chain more USB devices.
  • Page 61: Upgrading Your Computer

    4 Upgrading your computer...
  • Page 63 This chapter contains instructions on how to upgrade your computer and basic information about your system boards that you will find helpful when performing the upgrade process.
  • Page 64: Installation Precautions

    Installation precautions Before you install any computer component, we recommend that you read the following sections. These sections contain important ESD precautions along with preinstallation and post- installation instructions. ESD precautions Electrostatic discharge (ESD) can damage your processor, disk drives, expansion boards, and other components. Always observe the following precautions before you install a computer component: Do not remove a component from its protective packaging...
  • Page 65: Post-Installation Instructions

    Do not attempt the procedures described in the following sections unless you are a qualified service technician. Post-installation instructions Observe the following after installing a computer component: See to it that the components are installed according to the step-by-step instructions in their respective sections. Replace any expansion boards or peripherals that you removed earlier.
  • Page 66 4 Upgrading your computer...
  • Page 67: Opening Your Computer

    Opening your computer Caution! Before you proceed, make sure that you have turned off your computer and all peripherals connected to it. Read the “Preinstallation instructions” on page 58. You need to open your computer before you can install additional components. See the following section for instructions.
  • Page 68 Hold one side panel with both hands. Slide it back about an inch and then gently pull it outward to detach it. Do the same to the other side. 4 Upgrading your computer...
  • Page 69: To Replace The Side Panel

    To replace the side panel Align the side panel's hinges to the housing frame and then push it in to slide it back into place. Do the same to the other side.
  • Page 70 Secure the side panels with the four screws you removed earlier. 4 Upgrading your computer...
  • Page 71: Internal Components

    Internal components The figure below shows what your computer looks like once you remove the side panel: Component 5.25-inch drive bays (three bays) 3.5-inch drive bays (two bays) Daughterboard Mainboard Hard disk Expansion slots Power supply *. The mainboard model shown in the figure above may not be exactly the same with the one found in your computer.
  • Page 72: System Boards

    4 Upgrading your computer System boards Mainboard layout The mainboard becomes accessible once you open your computer. Refer to the section below for the corresponding mainboard layout of your Veriton 7600 series computer model.
  • Page 73: Veriton 7600G Mainboard Layout

    Veriton 7600G mainboard layout...
  • Page 74 Label Component AGP1 AGP slot AUD1 Line-in (top), line-out (middle), and rear microphone-in (bottom) ports ATX1 Power connector BIOS1 BIOS chipset Battery CD-in connector COM1 Serial connector DLED1 D-Bracket (LANScope) connector DIMM1 DIMM sockets 1-4 DIMM2 DIMM3 DIMM4 3-pin CPU fan connector CPU ZIF socket FAN2 3-pin system fan connector...
  • Page 75 Label Component JFP1 HDD LED, Power LED connector Power button and Reset switch controller JKBMS1 PS/2 mouse (upper) and keyboard (lower) ports JPW1 Power connector (12V power) JRECOVER One Touch Recovery button connector LPT1 Parallel/Printer port PCI1 to PCI3 PCI slots 1 to 3 SATA1 Serial HDD connectors SATA2...
  • Page 76: Audio Board

    Audio board The audio board that came with your computer should look like the figure that follows. Label Description JUSB1 USB Connector - connects to the JUSB1 of the mainboard JUSB2 USB Connector - unused USB1 USB port USB2 USB port JAUD1 Standard audio connector - connects to the JAUD1 of the mainboard...
  • Page 77: Upgrading Your Computer

    Upgrading your computer Certain components of your computer are upgradeable such as the memory, the hard disk, the CPU and the expansion cards. You need to observe the “Installation precautions” on page 58 when installing or removing a computer component. However, for safety purposes, we do not recommend that you perform these upgrades yourself.
  • Page 78: To Install A Ddr Dimm

    Press the holding clips on both sides of the DDR DIMM socket outward to release the DDR DIMM (a). Gently pull the DDR DIMM out of the socket (b). To install a DDR DIMM Locate the DDR DIMM socket on the mainboard. Align the DDR DIMM with the socket (a).
  • Page 79: To Reconfigure Your Computer

    Note: The DDR DIMM sockets are slotted to ensure proper installation. If you insert a DDR DIMM but it does not fit easily into the socket, you may have inserted it incorrectly. Turn the DDR DIMM around and try to insert it again. To reconfigure your computer Your computer automatically detects the amount of memory installed.
  • Page 80 (a) Detach the power and hard disk cables from the hard disk. (b) Detach the hard disk from the drive frame. 4 Upgrading your computer...
  • Page 81 (a) Insert the new hard disk into the frame. (b) Connect the power and hard disk cables to the new hard disk.
  • Page 82: Installing An Expansion Card

    Secure it with the four screws you removed earlier. Note: Make sure that the other ends of the disk cables are securely connected to their corresponding connectors on the mainboard. Replace the side panel (see page 63). Installing an expansion card To install an expansion card: Remove the side panel (see page 61).
  • Page 83 Pull out the bracket on the housing opposite the selected empty slot. Remove the expansion card from its protective packaging. Align the card with the empty bracket and then insert it into the slot. Make sure that the card is properly seated.
  • Page 84 Secure the card to your computer with a screw you removed earlier. Replace the side panel (see page 63). When you turn on the computer, BIOS (Basic Input/Output System) automatically detects and assigns resources to the newly-installed devices. 4 Upgrading your computer...
  • Page 85: System Utilities

    5 System utilities...
  • Page 87 This chapter describes applications that are preinstalled on your computer.
  • Page 88 • NTI CD-Maker • PowerDVD • BIOS utility • Acer One Button Recovery (System restore utility) If your computer is configured with Microsoft® Windows® XP the following utilities can be used to monitor and maintain system health. • Backup •...
  • Page 89: Acrobat Reader

    Acrobat Reader Acrobat Reader is a software that lets you view, navigate, browse and print Adobe Portable Document Format (PDF) files on all major computer platforms. To read a PDF document • Simply double click on any file with an icon like that shown above.
  • Page 90: Acer Lanscope (Optional)

    Acer LANScope (optional) Acer LANScope allows desktop management via the Web, standard network, or dial-up connections. It is compatible with the leading management specifications, such as Wired for Management 2.0, Desktop Management Interface (DMI) v2.0, and others. Your computer may be bundled with a LANScope installation CD.
  • Page 91: Norton Antivirus

    Norton AntiVirus Norton AntiVirus is an anti-virus software which finds and repairs infected files, protects against viruses to keep your computer data safe and secure. It also scans incoming email attachments for viruses. It provides useful virus detection and repair facilities. How do I check for viruses using Norton AntiVirus? A full system scan scans all files on your computer.
  • Page 92 Under Actions, click Scan. When the scan is complete, a scan summary appears. When you are done reviewing the summary, click Finished. You can schedule customized virus scans that run unattended on specific dates and times or at periodic intervals. If you are using the computer when the scheduled scan begins, it runs in the background so that you do not have to stop working.
  • Page 93: Nti Cd-Maker (For Models With Cd-Rw)

    NTI CD-Maker (for models with CD-RW) The NTI CD-Maker is a CD-Recording software which allows you to create and copy audio, data and videos to CD-R or CD-RW discs. To copy an audio or data disc: Click the Quick Burning icon Insert the CD you would like to copy into the source drive and a blank disc into the target drive.
  • Page 94 5 System utilities Click the Start button to begin copying. For more information about NTI CD-Maker and its other features, refer to the NTl CD-Maker Help menu.
  • Page 95: Powerdvd (For Models With Dvd)

    PowerDVD (for models with DVD) PowerDVD is a high-quality, pure software DVD player which brings high-quality movies and karaoke to your multimedia PC. You can play back high resolution DVD titles or MPEG-2 files with MPEG-2 video and Dolby Digital (AC-3) audio. PowerDVD provides a complete set of commands for navigation and advanced features such as multi-angle switching, multi- language and multi-subtitle selection, and parental control.
  • Page 96: Bios Utility

    BIOS utility The BIOS utility is a hardware configuration program built into your computer's Basic Input/Output System (BIOS). Since most computers are already properly configured and optimized, there is no need to run this utility. However, if you encounter configuration problems and get the "Run Setup" message, you will need to run this utility.
  • Page 97: Reinstalling Programs

    Reinstalling programs If you uninstall one of the preinstalled programs and want to reinstall it, do the following: Make sure that the system is turned on. Insert the System CD into the CD or DVD drive. Select the application that you want to reinstall. Follow all onscreen instructions until you finish the installation.
  • Page 98: Recovering Your System

    If your operating system files are lost or damaged, the recovery process will restore your system's original factory default settings. Your Acer Veriton series computer includes a One Button Recovery button, a feature that makes restoring your system quick and easy.
  • Page 99 Press the button. After a moment the following screen will appear on your display. Select “Set Password” to setup a password for the recovery function. Select “Hard Disc - Full Recovery” to restore your system to the default factory settings. Note: To change the password use steps 3-6.
  • Page 100 If you selected “Set Password” you should see the following screen. Enter the old password and click OK (leave blank if using for the first time). Enter a new password and click OK. 5 System utilities...
  • Page 101 Confirm the new password and click OK.
  • Page 102 If you selected “Hard Disc - Full Recovery”(at the first screen), you should see the following screen. Click OK to continue. 5 System utilities...
  • Page 103 After 15 seconds the system will reboot and initiate the restore operation.
  • Page 104 If you attempt to restore your system using the One Button Recovery feature, and the system DOES NOT respond, contact your local vendor or authorised Acer representative immediately. 5 System utilities...
  • Page 105: Using Backup (Windows® Xp Only)

    Using Backup (Windows® XP only) The Backup utility creates copies of information on your hard disk. In the event that the original data on your hard disk is erased or overwritten, or becomes inaccessible because of a hark disk malfunction, you can use the copy to restore your lost or damaged data.
  • Page 106: Disk Defragmenter (Windows® Xp Only)

    Disk Defragmenter (Windows® XP only) The disk degfragmentation utility consolidates files and folders on your computer’s hard disk. This allows your computer to access files and folders and save new data more efficiently. By consolidating your files and folders, the defragmenter also consolidates the volume’s free space, making it less likely that new files will be fragmented.
  • Page 107: Frequently Asked Questions

    6 Frequently asked questions...
  • Page 109 This chapter tells you what to do in case your computer is not working properly. However, if a more serious problem arises, contact your dealer or the technical support center (www.acersupport.com) for assistance.
  • Page 110: Frequently Asked Questions

    Frequently asked questions The following questions are possible situations that may arise during the use of your computer and each is followed by easy answers and solutions to the situation. Q: I pressed the power switch but the system did not boot up. A: Check the LED located above the power switch.
  • Page 111 Q: Nothing appears on the screen. A: Your computer’s power management function automatically blanks the screen to save power. Just press any key to turn the display back on. If pressing a key does not work, you can restart your computer. If restarting your computer does not work, contact your dealer or the technical support center for assistance.
  • Page 112 Q: System cannot read diskette, hard disk, CD or DVD information. A: Check the following: • Make sure that you are using the correct type of disc. See page 27. • Make sure the CD or DVD is inserted into the drive correctly. •...
  • Page 113: Appendix A: Notices

    Appendix A: Notices...
  • Page 114: Fcc Notice

    FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
  • Page 115: Important Safety Instructions

    Use conditions This part complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Notice: Canadian users This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
  • Page 116 Do not allow anything to rest on the power cord. Do not locate this product where persons will walk on the cord. If an extension cord is used with this product, make sure that the total ampere rating of the equipment plugged into the extension cord does not exceed the extension cord ampere rating.
  • Page 117: Laser Compliance Statement

    13. Warning! Batteries may explode if not handled properly. Do not disassemble or dispose of them in fire. Keep them away from children and dispose of used batteries promptly. 14. Use only the proper type of power supply cord set (provided in your accessories box) for this unit.
  • Page 118 Appendix A: Notices NSTL using the YMark2000 test, and has been found to meet NSTL's standards for Year 2000 hardware compliance...
  • Page 119: Appendix B: Taking Care Of Your Computer

    Appendix B: Taking care of your computer...
  • Page 120: Important Tips

    Please read the important instructions listed in this section. Following these instructions will help you maximize the durability of your computer. Important tips • Do not expose the computer to direct sunlight. Do not place it near sources of heat, such as a radiator. •...
  • Page 121: To Clean Your Pointing Device

    Use a soft cloth moistened with water and gently wipe the exterior of the computer and the keyboard. Do not use liquid or aerosol cleaners. To clean your pointing device To clean a regular mouse (with rubber ball) Open the circular cover underneath the mouse. Take out the rubber ball and wipe it with a soft, damp cloth.
  • Page 122: Asking For Technical Assistance

    Appendix B: Taking care of your computer Asking for technical assistance For technical assistance, contact your local dealer or distributor. You may also access the Web site (www.acersupport.com) for information on how and where to contact the service centers available in your area.
  • Page 123 Appendix C: RAID introduction( for R series model only)
  • Page 124: Intel Ich5R Serial Ata Raid Introduction

    Intel ICH5R Serial ATA RAID Introduction The south bridge ICH5R provides a hybrid solution that combines two independent SATA ports for support of up to two Serial ATA (Serial ATA RAID) drives. Serial ATA (SATA) is the latest generation of the ATA interface. SATA hard drives deliver transfer speeds of up to 150MB/sec.
  • Page 125: Bios Configuration

    ATA) Note: Proper support; BIOS provides a BIOS setup option for user selection of Native Mode or Legacy Mode. BIOS Configuration The Intel RAID Option ROM should be integrated with the system BIOS on all motherboards with a supported Intel chipset.
  • Page 126: Option 1: Create Raid Volume

    Appendix C: RAID introduction( for R series model only) When the above message appears, press <Ctrl> + <I> simultaneously to enter the RAID Configuration Utility. After pressing the <Ctrl> + <I> keys simultaneously, the following window will appear: Option 1: Create RAID Volume To create a RAID volume, select this option on the screen and press <Enter>.
  • Page 127 Note: The following procedure is only available with a newly-built system or if you are reinstalling your OS. It should not be used to migrate an existing system to RAID 0. Specify a RAID Volume name and then press the <TAB> or <Enter>...
  • Page 128 Appendix C: RAID introduction( for R series model only) From the Strip size, press the <Tab> or <ENTER> key to advance to the Create Volume prompt. The window will appear as follows: Press <Enter> to create the specified volume and the following prompt will show: Press <Y>...
  • Page 129: Option 2: Delete Raid Volume

    Then you will return to the main menu with an updated status as shown below: Scroll to option 4 Exit and press <Enter> to exit the RAID Configuration utility. The following prompt appears: Press <Y> to confirm and exit or <N> to previous screen. Option 2: Delete RAID Volume Here you can delete the RAID volume, but please note that all data including settings on RAID drives will be lost.
  • Page 130 Note: If your system currently boots to RAID and you delete the RAID volume in the Intel RAID Option ROM, your system will become unbootable. Select option 2 Delete RAID Volume from the main menu window and press <Enter> to select a RAID volume for deletion. The following window will appear: Select a volume and press <Del>...
  • Page 131: Option 3: Reset Disks To Non-Raid

    Option 3: Reset Disks to Non-RAID Select option 3 Reset Disks to Non-RAID and press <Enter> to delete the RAID volume and remove any RAID structures from the drives. The following screen appears: Press <Y> key to accept the selection. Note: You will lose all data on the RAID drives and any internal RAID structures when you perform this operation.
  • Page 132: Installation Of Intel® Application Accelerator Raid Utility

    • Intel® Application Accelerator RAID Edition utility • Migration Feature Insert the Acer System CD and click on the "Intel IAA RAID Edition" to install the software. The InstallShield Wizard will automatically begin the installation process. Click on the Next button to proceed from the installation welcome window.
  • Page 133 After reading the license agreement in the following window, click Yes button to continue. Select the folder in which you want the program to be installed in the following window, and click Next button to start installation.
  • Page 134 Appendix C: RAID introduction( for R series model only) Select a program folder in the following window where you want Setup to add the program icon. Default is "Intel Application Accelerator RAID Edition." The following window appears to show the Intel Application Accelerator RAID Edition Setup installation progress.
  • Page 135 Once the installation is complete, the following window appears. Click the Finish button to end the installation and exit the setup utility.
  • Page 136: Raid Migration Instructions

    RAID Migration Instructions The Intel Application Accelerator RAID Edition offers the flexibility to upgrade from a single Serial ATA (SATA) hard drive to a two drive RAID-0 configuration when an additional SATA hard drive is added to the system. This process will create a new RAID volume from an existing disk.
  • Page 137 may also use the RAID drop-down menu and click on "Create Volume from Existing Disk." Select the source disk that you wish to use and then click Next. Important: It is very important to note which disk is the source disk (the one containing all of the information to be migrated) and which one is the target disk.
  • Page 138 installed to verify the Port and serial number of the drive that contains all the data. Select the RAID volume name and strip size, and click Next. • RAID Volume Name - A desired RAID volume name needs to be typed in where the RAID_Volume1 text is shown above. The RAID volume name has a maximum limit of 16 characters.
  • Page 139 It is critical that you backup all important data before selecting Yes to these dialog boxes: Confirm the creation of new RAID volume In Step 3, confirm the creation of the new RAID volume and then click Migrate: Migration Process The migration process may take up to two hours to complete depending on the size of the disks being used and the strip size selected.
  • Page 140 Appendix C: RAID introduction( for R series model only) system is rebooted for any reason, it will pick up the migration process where it left off. You will be provided with an estimated completion time (the remaining time will depend on your system) once the migration process starts as illustrated in the following example: The following screen appears if the migration process is...
  • Page 141: Index

    Index Symbols accessing the online guide 7 applications 82 BIOS utility 90 computer maintenance 114, 118 cleaning 114, 118 servicing 114, 118 connecting options multimedia devices 49 audio line-in device 52 earphones/headphones 50 external speakers 49 microphone 49 network 46, 48 printer 46 serial mouse 48 USB devices 53...
  • Page 142 software 82 Norton AntiVirus 85 system boards 66 audio board 70 mainboard 66, 67 system utilities Acrobat Reader 83 Norton AntiVirus 85 NTI CD-Maker 87 PowerDVD 89 reinstalling programs 91 turning off computer 45 software shutdown 45 suspend mode 45 turning on computer 44 power button 44 upgrade...

This manual is also suitable for:

Veriton 7600gr

Table of Contents