Entering Setup - Acer Veriton 7600GTR Service Manual

Entering Setup

To enter Setup, press the key
NOTE: You must press
The Setup Utility main menu then appears:
The above screen is the BIOS Utility Basic Level screen. It allows you to view and change only the basic
configuration of your system.
The command line at the bottom of the menu tells you how to move within a screen and from one screen to
another.
To select an option, move the highlight bar by pressing
To change a parameter setting, press
e
to pop out the screen with available items for selection.
^
Press
exit Setup.
The parameters on the screens show default values. These values may not be the same as those in your
system.
The grayed items on the screens have fixed settings and are not user-configurable.
27
c
during the POST (Power-on self-test).
c
simultaneously while the system is booting.
to return to the main menu. If you are already in the main menu, press
w y
,
{ }
or until the desired setting is found, or press
z x
, , or , then press
^
e
.
again to
Chapter 2