Jumper And Connector Description; Jumper Setting - Acer Veriton 7600GTR Service Manual

Jumper and Connector Description

Label
JPW1 ATX 12V Power Connector
CPUFAN1 Processor Fan Connector
D_LED1
D Bracket 2 Connector
COM1 9-pin Serial Port
FDD1 FDD Connector
ATX1
20-pin Power Connector
IDE2/1 Ultra ATA HDD Connectors
IDE1: Primary IDE Connector
IDE2: Secondary IDE Connector
SYSFAN1
System Fan Connector
SATA1/2
Serial ATA HDD Connectors
JFP1 Front Panel Connectors

Jumper Setting

Jumper
JBAT1
JBIOS1
JLAN1
JAUD1
NOTE: *: Default Settings.
105
Component
1-2 Normal*
2-3 Clear CMOS
BIOS Flash Locked*
BIOS Flash Unlocked
Enable
Disable
If you do not want to connect to the front audio header, pins 5 & 6,
9 & 10 have to be jumpered in order to have signal output directed to the rear
audio ports. Otherwise, the Line-Out connector on the back panel will not
function.
Label
JCI1
Chassis Intrusion Switch Connector
JBAT1 Clear CMOS Jumper
JBIOS1 BIOS Flash Jumper
JRECOVER System Recovery Switch Connector
USB2/3 Front USB Connectors
PCI1~3 Peripheral Component Interconnecto Slots
JAUD1 Front Panel Audio Connector
CD1 CD-In Connector
JLAN1 LAN Jumper
AGP1 Accelerated Graphics Port Slot
Function and settings
Component
Chapter 5