Brother P'9981 User Manual page 156

ERROR MESSAGES
ERROR CAUSE
MESSAGE
You can't store data in the memory.
Out of Memory
The paper is jammed in the MFC.
Paper Jam
A page, piece of paper or paper clip, etc. may
Pls Open
be jammed inside the MFC.
Cover
Toner cartridge is not installed.
Toner Empty
—OR—
Toner is used up and printing is not possible.
If the LCD shows Toner Low, you can still
Toner Low
print.
But the toner is depleted and the MFC is
telling you that the toner will soon run out.
12 - 3 TROUBLESHOOTING AND ROUTINE MAINTENANCE
ACTION
(Fax sending in process)
Stop/Exit
Press and wait until the
other operations in progress finish
and then try again.
—OR—
Clear the data in the memory. (See
Out of Memory message on page
10-3.)
(Copy operation in process)
Stop/Exit
Press and wait until the
other operations in process finish
and then try again.
—OR—
Clear the data in the memory. (See
Out of Memory message on page
10-3.)
—OR—
Add an optional memory board.
(See Memory board on page 13-1.)
(Printing operation in process)
Reduce print resolution. (See Print
Quality on page 2-7 in Software
User's Guide on the CD-ROM.)
—OR—
Clear the data in the memory. (See
Out of Memory message on page
10-3.)
—OR—
Add an optional memory. (See
Memory board on page 13-1.)
See Paper jams on page 12-5.
Open the front cover and pull out the
drum unit. If you see any jammed
paper or other item, gently pull it out,
reinsert the drum unit then close the
front cover. If the error message
remains, open and close the front
cover again.
If the MFC cannot reset itself and
return to the date and time prompt, it
will display Machine Error XX.
Then contact your Brother dealer for
service.
Reinstall the toner cartridge.
—OR—
Replace the toner cartridge with a
new one. (See Replacing the toner
cartridge on page 12-25.)
Order a new toner cartridge now.