Remote Retrieval; Using Your Remote Access Code - Brother P'9981 User Manual

Remote Retrieval

You can call your MFC from any telephone or fax machine using
touch tone, then use the Remote Access Code and remote
commands to retrieve fax messages. Be sure to cut out the Remote
Retrieval Access Card on the last page and keep it with you at all
times.

Using your Remote Access Code

1
Dial your fax number from a telephone or another fax machine
using touch tone.
2
When your MFC answers, immediately enter your Remote
Access Code (3 digits followed by
3
The MFC signals if it has received fax messages:
1 long beep
No beeps
4
The MFC gives two short beeps, which tells you to enter a
command. The MFC will hang up if you wait longer than 30
seconds to enter a command. The MFC will beep three times, if
you enter an invalid command.
5
90
Press to reset the MFC when you have finished.
6
Hang up.
Fax messages
—
No fax messages
—
).
REMOTE FAX OPTIONS 8 - 4