Table of Contents
Advertisement
Paper jams
To clear paper jams, please follow the steps in this section.
WARNING
Before you clear a paper jam, make sure you have switched off and
unplugged the MFC. After you have just used the MFC, some parts
inside the MFC are extremely hot. When you open the front cover or
back output tray of the MFC, never touch the shaded parts shown in
the following diagram.
Front view
Clear the jammed paper as follows.
If the jammed paper is removed completely by using the information
in the following steps, you can install the paper tray first, and then
close the front cover and the MFC will resume printing automatically.
■
If a paper jam occurs when using the optional lower tray unit,
check for correct installation of the upper paper tray.
■
Always remove all paper from the paper tray and straighten
the stack when you add new paper. This helps prevent
multiple sheets of paper from feeding through the MFC at
one time and reduces paper jams.
12 - 5 TROUBLESHOOTING AND ROUTINE MAINTENANCE
HOT!
HOT!
Back view
Advertisement
Table of Contents
