Integrated Amplifier - NAIM Amplifiers Owner's Manual

Preamplifiers, integrated amplifier, power amplifiers, power supplies

Hide thumbs Also See for Amplifiers:

Manual (44 pages)

Table Of Contents

Table of Contents

NAIT 5i

20.7 Display

The NAIT 5i front panel button display can be switched off

by pressing the remote handset (in preamplifier mode)

function. Any subsequent handset or front panel operation will

temporarily restore the display. A second operation of the

function will permanently restore the display.

20.8 Remote Handset

iCom

The

remote handset supplied with the NAIT 5i provides

remote access to the front panel input selection and volume

control functions of the amplifier as well as providing a mute

facility and enabling access to the program mode required

for setting up the Automatic Input Switching and Unity Gain

21.1 NAIT 5i Front

volume

21.2 NAIT 5i Rear

mains

power

input

speaker

and fuse

Note:

The NAIT 5i features various technologies to reduce

microphonic effects. Some movement of the board and sockets

when connecting and disconnecting cables is normal.

disp

left

right

speaker

functions. See Section 25 for more information. The

NARCOM 3

handsets will also control the NAIT 5i. See Sections

23 and 24 for more information.

20.9 Connections Notes

The negative input and output connections for each channel are

common. The mains earth (ground) should always be connected

regardless of what other equipment is used in conjunction with

the amplifier. This only grounds the case and the electrostatic

screen within the transformer, and is not connected to the signal

negative. In order to avoid hum loops, the signal negative of the

whole system should be connected to the mains earth (ground)

in one place. This should be the primary signal source.

tape in

AV in

tape out

22. NAIT 5i Specification

Input Sensitivities:

Tape Output:

Power Output:

Quiescent Consumption:

Dimensions (H x W x D):

Mains Supply: