Changing; Configuration Settings; Configuration Setting Descriptions - 3Com Series 760 User Manual

4
This chapter describes how to display and change
configuration settings for the CardBus PC Card.
Before you change these settings, contact your MIS
department.
Configuration Settings
Table 4-1 lists each configuration option, the default
setting, and the available settings.
.
Table 4-1 Option Settings
Option
Duplex
Media Type
CIS Memory Address
I/O Base Address
Interrupt Request Level 9
Configuration Setting Descriptions
Duplex
Full duplex allows the CardBus PC Card to send and receive
data between the CardBus PC Card and the switch
connection at the same time. If the switch supports the
NWay feature and full duplex, the CardBus PC Card
automatically runs in full duplex (Auto Select).
Media Type
The Media Type is Auto Select.
C
HANGING
Default Setting
Auto Select
Auto Select
0090h - 00FFh
3000h
C
ONFIGURATION
Available Settings
Auto Select, full duplex
Auto Select
256 Bytes
3000h, 3040h, 3080h, 30C0h
3100h, 3140h, 3180h, 31C0h
3200h, 3240h, 3280h, 32C0h
3300h, 3340h, 3380h, 33C0h
3400h, 3440h, 3480h, 34C0h
3500h, 3540h, 3580h, 35C0h
5, 7, 9, 10, 11, 12