3Com Series 760 User Manual page 21

9 Click OK.
The Network Setup Wizard window appears.
10 Click Next.
The Network Protocols configuration box appears.
11 Select the appropriate network protocol.
If you choose TCP/IP, you will be prompted to set TCP/IP
later in this installation.
12 Click Next.
The Network Services configuration box appears.
13 Select the appropriate network services.
14 Click Next.
The message "Windows NT is ready to install networking
components..." appears.
15 Click Next.
The Windows NT Setup window asks for the location of the
Windows NT installation files.
Figure 2-4 Windows NT Setup Window
16 Type in the directory path to the location of your
Windows NT installation files.
The directory path shown on this screen is only a sample.
17 Click Continue.
Windows NT Version 4.0 2-9