Ibm Thinkpad Series 760 Notebooks - 3Com Series 760 User Manual

6 Using the Start menu, select shutdown the computer
and then click Yes to confirm.
7 Turn the notebook back on.
The notebook is now set up to run in CardBus mode.

IBM ThinkPad Series 760 Notebooks

1 Using the Start Menu, select Programs >Thinkpad
>Thinkpad Configurations.
If this menu does not appear, contact your notebook
manufacturer to get the latest BIOS and instructions for
setting CardBus mode.
2 Click the PC Card Slots picture.
The PC Card Slots window appears.
3 Enable CardBus mode.
The IRQ Conflict warning appears asking if you want to
disable the device in conflict.
4 Click OK.
5 Restart the notebook.
If New Hardware Detected appears, restart again. The
notebook is now set up to run in CardBus mode.
Before You Begin 1-3