About Memory - A&D LifeSource UB-328 Instruction Manual

The UB-328 automatically stores up to seven (7) blood pressure
and pulse measurements in its memory. Measurements stored in
memory are assigned an index number in the order of most recent
to the oldest. The oldest reading displays as "no.1".
To retrieve readings, follow these simple steps:
1. When the display screen is blank, press the MEMORY button.
2. The Memory index number (e.g. no.4) appears followed by
the measurement reading. The UB-328 displays the readings
twice and then shuts off automatically.
3. To retrieve other measurements in memory, press and release
the MEMORY button repeatedly until the desired index
number is reached (e.g. no.5). The measurement will then
be displayed.
To clear the measurement history from memory, remove the
batteries from the unit and then place the batteries back into the
battery holder.
NOTE: If there are no measurements in memory, you will see
the index number "no.1" followed by a measurement of three
0's displayed vertically.
NOTE: Stored measurements will be lost if batteries become low
or removed.
In Canada (Toll-Free): 1-800-463-5414

ABOUT MEMORY

E-7