Setting The Display; Setting For Divx Video On Demand; Wireless Headphone; Headphone Receivers - Alpine PKG-2100P Owner's Manual

Setting the Display

The disc usage conditions described in "Displaying the Disc Status"
(pages 16) are displayed on the wallpaper, or the upper part of the
image during playback. (Except DVD video).
Setting item: AUTO DISPLAY
Setting contents: OFF / ON (Initial setting)
OFF: Usage status is not displayed.
ON: When a disc is played back, usage status of the disc to
be played back is displayed on the wallpaper or in the
upper part of the image.
(When DivX ® , JPEG or ASF discs are played back, the
disc status is displayed for 3 seconds.)
®
Setting for DivX video on demand
Displays the registration code and support version of the DivX
Setting item: REGISTRATION CODE
• Selecting "RETURN" on the registration setting screen will return
the previous display.
About DivX® Video
DivX® is a digital video format created by DivX,Inc.
This is an offi cial DivX Certifi ed device that plays DivX
video.
Visit www.divx.com for more information and software
tools to convert your fi les into DivX video.
DivX®, DivX Certifi ed® and associated logos are registered
trademarks of DivX, Inc. and are used under license.
The unit can play back CD-R/CD-RW/DVD-R/DVD-RW/DVD+R/
DVD+RW discs that are recorders in the DivX® mode with fi le
extension "avi" or "divx".
About DivX® Video-On-Demand
This DivX Certifi ed® device must be registered in order
to play DivX Video-on-Demand (VOD) content.
To generate the registration code, locate the DivX VOD
section in "CD CONTENTS SETUP" menu. (See the
detail in above section)
Go to vod.divx.com with this code to complete the
registration process and learn more about DivX VOD.
24
-EN

Wireless Headphone

Headphone Receivers

® .
1) Infrared Sensors; Receive signal from the transmitter.
2) Battery Cover
3) Volume Control
4) Power Switch
5) Power Indicator LED

Operation

Read carefully to prevent damage to the headphone or
your ears:
WARNING: Before turning on the power, remove headphones and
turn the volume down as low as possible.
1) Be sure the batteries are properly installed in the
headphones.
2) Turn the headphones volume completely down before
placing it on your ears and turning on the power.
3) Turn on the headphone power and adjust the headphone
volume to a comfortable level (You can increase the
audio source volume if needed).

Battery Installation

Place two AAA batteries into the battery compartment of the
headphone(s), making sure that the battery polarity is correct.