Table of Contents
Advertisement
Available languages
Available languages
Instant Replay Function (SIRIUS only)
In SIRIUS mode, the current channel is saved using the Instant Replay
memory function. Use this function to pause the channel content at any
time. When playback is continued, it will begin at the position it was
paused. This function can be used to store up to 44 minutes of audio.
1
During SIRIUS reception, press
/
to select the
Instant Replay mode.
“REPLAY MODE” is displayed, and the received station is
stored.
2
Press
/
again to activate the play mode.
The stored contents are played back.
During REPLAY playback:
Fast rewind:
Press and hold
.
Fast forward:
Press and hold
.
Returning to the beginning of the current song: Press
.
Advancing to the beginning of the next song:
Press
.
• If you continue to press Fast forward until the end, the INSTANT
REPLAY mode is canceled, and the unit will change to usual
reception.
3
Press
/ESC for at least 2 seconds to cancel the
INSTANT REPLAY mode.
The unit returns to usual SIRIUS broadcasting mode.
Time display example during REPLAY playback (Instant
Replay Mode only)
S1 3
C H 1 8 4
4 3 5 9
Play Time
(Remaining time for
INSTANT REPLAY)
Changing the Display
Text information, such as the channel name, artist name/feature and
song/program title, is available with each XM or Sirius channel. The
unit can display this text information as explained below.
In XM or SIRIUS mode, press VIEW.
Each time you press this button, the display changes as shown
below.
1
CHANNEL No./(REMAINING TIME)*
CATEGORY NAME
CHANNEL NAME
ARTIST NAME
SONG TITLE
2
3
COMPOSER NAME*
AUXILIARY DATA FIELD*
CLOCK
CHANNEL No./(REMAINING TIME)
1
*
Displayed only during instant replay.
2
*
SIRIUS mode only.
3
*
XM mode only:
When ADF is turned OFF, this information is not displayed (see
“Setting the Auxiliary Data Field Display (XM only)” on page 22).
• When the “Scroll Setting (TEXT SCROLL)” (page 17) is set to
“SCROLL AUTO”, the display scrolls continuously. When the Scroll
Setting is set to “SCROLL MANU”, the display scrolls only once
after any function is performed (PRESET, BAND, SEARCH, etc.).
“CHANNEL No.” and “CLOCK” displays do not scroll.
• Depending on the model, the display may differ from the one shown
above.
Setting the Auxiliary Data Field Display
(XM only)
The XM Auxiliary Data Field (ADF) display can be switched on or off.
There is no ADF function for the SIRIUS receiver.
1
Press and hold F/SETUP for at least 2 seconds to
select the SETUP selection mode.
2
Turn the Rotary encoder to select the XM ADF
mode, and then press
/ENT.
3
Turn the Rotary encoder to select XM ADF ON/
OFF, and then press
/ENT.
When setting to ON, Auxiliary Data Field is displayed by
pressing VIEW (Refer to the “Changing the Display” section
on page 22.).
4
Press and hold F/SETUP for at least 2 seconds to
return to normal mode.
• Pressing
/ESC returns to the previous SETUP mode.
• If no operation is performed for 60 seconds, SETUP is canceled.
Page 22
Hide quick links:
Advertisement
Chapters
Table of Contents
