Table of Contents
Advertisement
Operating additional equipment
Connecting audio amplifiers
The sound component wizard permits configuration of different audio
amplifiers (stereo amplifiers, surround amplifiers, analogue or digital) with
different digital audio formats (Dolby Digital, dts, MPEG, and stereo/PCM).
See the operating manual for the audio amplifier for more information.
Call TV menu.
Select Connections,
go to the menu line below.
Select Sound components.
OK calls the sound components wizard.
Sound components
Sound playback via ...
79 VSHDNHUV
TV speakers + active subwoofer
Active loudspeakers or TV speakers (switchable)
HiFi/AV amplifier or TV speakers (switchable)
Sound projector
Sound projector or TV speakers (switchable)
Proceed
OK
Mark the HiFi/AV amplifier or TV speakers (switch-
able).
OK Proceed.
Select whether the sound is to be transmitted
digitally or analogue to the the amplifier.
Continue, depending on the amplifier, see right column.
Explanations of the setting possibilities:
HiFi/AV
Select appropriate setting to connect an amplifier. After a
amplifier or TV
HiFi/AV amplifier is registered in the sound menu, the sound
speakers
can be piped either through the amplifier or through the
(switchable)
TV speakers, according to Sound via... selection.
Sound formats
Specify sound formats which can be decoded with the
digital amplifier (see operating manual of the used ampli-
fier).
Type of
Select either stereo or surround amplifier.
amplifier
TV loudsp. as
For every connected surround amplifier, select whether the
centre speaker
TV speakers are to be used as centre speakers.
If so, make a connection between the centre output of
the amplifier and the centre input of the TV set AUDIO
IN1 C with a cinch cable.
Attention: Do not use the centre speaker connection of
the amplifier, use the centre pre-amp output instead!
Connecting digital audio amplifiers
OK
END
Connecting analogue audio amplifiers
Continuation of the left column above ...
For digital audio transmission: Select yes.
Connect the digital audio output of the TV set AUDIO
DIGITAL OUT with the digital audio input of the amplifier
via a cinch cable:
AUDIO DIGITAL OUT
PREOUT
AUX1 IN
AUX OUT AUX 2
FL
C
FR
L
L
DIGITAL
IN
DIGITAL
OUT
SL
SUB
SR
R
R
Set sound formats, amplifier type and other settings, see
explanations of the setting possibilities (left hand column).
Continuation of the left column above ...
For digital audio transmission: Select no.
Connect the analogue audio output of the TV device
AUDIO OUT L/R via a stereo cinch cable to the analogue
audio input of the amplifier:
AUDIO OUT L/R
PREOUT
AUX1 IN
AUX OUT AUX 2
FL
C
FR
L
L
DIGITAL
IN
DIGITAL
OUT
SL
SUB
SR
R
R
Select amplifier type and other settings, see explanations
of the setting possibilities (left hand column).
TV set
Digital amplifier
TV set
Analogue amplifier
53 -
Hide quick links:
Advertisement
Table of Contents
