Sound Components Wizard; Play Sound Via Active Speakers; Play Sound Via Tv Speakers And Active Subwoofer - Loewe Xelos 32 SL Operating Instructions Manual

Operating additional equipment

Sound components wizard

The sound components wizard helps you to configure the components
used to play the TV sound.
The TV speakers alone or with active subwoofer, active speakers or
analogue or digital HiFi/AV amplifier can be configured depending on
what you want to use.
The sound components wizard is preset to playback via TV speakers at
the factory.
If a Loewe Preceiver Auro with link cable has been connected to the
TV set, you can only select between TV speakers and Auro in the sound
components wizard.

Play sound via active speakers

Connect your active speakers to the audio outputs AUDIO OUT L/R of the
TV set with cinch cables.
Switch the TV set to playback via active speakers.
Call TV menu.
Select Connections,
 go to the menu line below.
Select Sound components.
OK calls the sound components wizard.
Sound components
Sound playback via ...
79 VSHDNHUV
TV speakers + active subwoofer
Active loudspeakers or TV speakers (switchable)
HiFi/AV amplifier or TV speakers (switchable)
Sound projector
Sound projector or TV speakers (switchable)
End of wizard
OK
Select Active loudspeakers or TV speakers (switch-
able).
OK Exit wizard.
- 52
Play sound via TV speakers and active
subwoofer
Connect your active subwoofer to one of the audio outputs AUDIO OUT
L/R with cinch cables.
Set the TV set to playback via TV speakers and an active subwoofer.
Explanations of the setting options:
Adjust
subwoofer level
OK
Specify
END
crossover
frequency
Subwoofer
phase
Call TV menu.
Select Connections,
 go to the menu line below.
Select Sound components.
OK calls the sound components wizard.
Sound components
Sound playback via ...
79 VSHDNHUV
TV speakers + active subwoofer
Active loudspeakers or TV speakers (switchable)
HiFi/AV amplifier or TV speakers (switchable)
Sound projector
Sound projector or TV speakers (switchable)
Proceed
OK
Select TV speakers + active subwoofer.
OK Continue to the settings for the subwoofer.
Adapt the volume of the subwoofer to the volume of the
TV speakers.
Set the transfer frequency of the subwoofer so that it
corresponds to the lower limit frequency of the TV speak-
ers. 90 Hz in this device.
Switch to a station with music or start playback with
music on a DVD player with P+/P–.
Test both values (0° and 180°) withand select the
one where you get a clearer bass reproduction.
OK
END